UNSOLVED

jusegozu

updated

21 years ago

J

jusegozu

26 Posts

0

28097

February 13th, 2006 06:00

NIC failure

after doing some cleaning on my video card i put it back in an di get the following error.
 
error initializing PCI Express Nic Bridge. Nic Failure
 
the ethernet card is not recognized now and i can't seem to get it working.   i have an xps gen 3 3.4 pentium 4, 1gb ram,  256 mb x800 xt ati.      so any help will be appreciated
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    510

    0

    Posted February 13th, 2006 11:00

    jusegozu,

    * Read this section on Clearing CMOS settings
    * While your in there, reseat the video card and any other cards


    DELL-Chris M (old account)

    #IWork4Dell

  • VCraig

    2 Intern

    •

    2106 Posts

    510

    0

    Posted February 13th, 2006 18:00

    Reseating means to physically pull the card out of the motherboard pin socket and then plug it back in.
  • VCraig

    2 Intern

    •

    2106 Posts

    510

    0

    Posted February 13th, 2006 18:00

    He said re seat , not re set..
  • jusegozu

    26 Posts

    510

    0

    Posted February 13th, 2006 18:00

    so its just  take them out and make sure they on place?   hehehe, sorry misread that
  • jusegozu

    26 Posts

    510

    0

    Posted February 13th, 2006 18:00

    ok i got how to clear the cmos but how can i reset my video card and all that?
  • jusegozu

    26 Posts

    510

    0

    Posted February 13th, 2006 23:00

    ok i tried all chris said.   i reseat the video card and anyother card, i cleaned my fans, and made sure they were working.     the ethernet card still isn't working. i get the error and two options, start the bios or continue :(
  • jusegozu

    26 Posts

    510

    0

    Posted February 15th, 2006 21:00

    i tried everything and it still didn't work, how can i at least disable it to not get the error? i already tried uninstalling my ethernet driver, but i still get the error
  • VCraig

    2 Intern

    •

    2106 Posts

    510

    0

    Posted February 15th, 2006 21:00

    Found this in the Dell knowledge base:

  • VCraig

    2 Intern

    •

    2106 Posts

    510

    0

    Posted February 15th, 2006 21:00

    Just to clarify - are you saying you have PCI ethernet card installed in your system - and if YES, why would you do this when you can use the built in NIC connection on the back of the computer?

    Message Edited by VCraig on 02-15-2006 06:24 PM

  • jusegozu

    26 Posts

    293

    0

    Posted February 15th, 2006 21:00

    no i am not using a pci ethernet card, i was using the nic on the back of my computer until this happened, now i have to use my usb modem.  and when i turn off the computer and back on i keep getting the error