
UNSOLVED
H
heavyharmonies
8 Posts
0
9756
January 21st, 2013 18:00
New XPS 8500 en route; how best to configure drives?
I have an XPS 8500 en route with the 2TB + 32GB SSD SRT drive option.
I am a firm believer in not using traditional spinning drives for the OS. I have converted all of my other desktops and laptops to either SSD boot, or ideally two SSDs in RAID 0 for the boot drive.
Since Dell idiotically decided to only provide one regular SATA III port on the 8500, I realize that any RAID I configure will be throttled at SATA II speeds.
My thought is to configure the system as follows:
SATA II ports - two OCZ Vertex 4 128GB SSDS in RAID 0 for boot
SATA III port - 2TB drive for data
mSATA III port - 32GB SSD for Photoshop scratch
Any pitfalls you can see in this config or a better way to set it up?
Thanks in advance.
Responses (1)
Solutions (0)

DELL-Rajath N
6 Operator
•
1793 Posts
110
0
Posted January 22nd, 2013 07:00
Hi heavyharmonies,
The mSATA drive is used to accelerate the hard drive by storing the frequently used data and the Hibernate data. You will need to disable the acceleration from the IRST application, format the drives. You can configure the drives in the order that you have provided after performing these steps. Please let me know if you need further information.