
UNSOLVED
Responses (14)
Solutions (0)
dontexpectmetob
100 Posts
1490
0
Posted May 12th, 2008 09:00
The BIOS is part of a mobo, so your new board will come with its own BIOS. The old BIOS does nothing to the new board.
I haven't changed my 630 board, but I believe there should be no problem, except your I/O board (which controls front panel fans + lighting) will not work since it's DELL proprietary.
mfinnan101
2 Intern
•
1180 Posts
1490
0
Posted May 12th, 2008 11:00
Apparently the Dell design I/O board through which the system fan speeds, case lights and other other features are controled is conpletely non-standard, thus hampering upgradibility in classic Dell style.
@mfinnan101 wrote:
Apparently the Dell design I/O board through which the system fan speeds, case lights and other other features are controled is conpletely non-standard, thus hampering upgradibility in classic Dell style.
We don't know because the Master I/O board connects to the motherboard through the " master I/O board USB connector (MIO_USB)", an USB connector, maybe it just requires an ESA compatible motherboard ?, I don't know.
See here : http://support.euro.dell.com/support/edocs/systems/xps630i/en/SM/HTML/techov.htm#wp1180262
The only connector that could be proprietary is the #3 ( "front led" ), maybe someone who owns the 630 can say something about it by looking at the board
I was wondering if the I/O board would connect to the USB of another mobo. Until I get more of a resoultion with my 630i problems from Dell, I am not going to experiment . . . but it does give me cause to wonder.
I need to look - anyone know what the cable that goes from th I/O board to mobo consists of?
David
Rambler358
526 Posts
1491
0
Posted May 12th, 2008 18:00
Has anyone actually tried replacing the 630's mobo with a non-Dell ESA compatible mobo like the EVGA 780i/790i boards as yet? Until one does, it's hard to say if it'll actually work or not. This is something I've been contemplating, but was hoping someone would actually try it first. :smileyhappy:the first thing i would be concerned about is the leads form the case,,,but they should be stanard atx , power on, hd, speakers, reset , power switch..
otherwise i don,t see a problem.
might look at the mounting holes on the motherboard, and see if they are the same as on the atx board,,,
Message Edited by ronss on 05-12-2008 03:55 PMRambler358
526 Posts
1491
0
Posted May 12th, 2008 20:00
Yeah, if that's all good I just wonder if Dell's mounting of the ATX board upside-down might cause any issues in relation to where everything else is mounted?

FSIam
28 Posts
1490
0
Posted May 12th, 2008 09:00
I'm sorry but that is a very strange question, what do you mean ? ... When you replace the dell motherboard, you haven't the dell board anymore, so you can't flash it ... You now have another motherboard with its own bios