UNSOLVED

Boy1411

updated

26 years ago

B

Boy1411

3 Posts

0

2586

November 3rd, 2000 09:00

i want to reboot my system but don't know how?

Basically, the reason why i want to start from the beginning is that i've downloaded a lot of stuff from the internet and i'm planning on getting rid most of it. However i'm not sure what to get rid of and i want to delete everything and start fresh. I've just recently bought my dell computer so basically i've got all the right stuff with me thus not knowing how to get about. So could you please advice me on the best possible way to do this.
  • chiefhume

    65 Posts

    537

    0

    Posted November 3rd, 2000 10:00

    I think you are confused 'reboot' justs means to restart your computer. What you are talking about is called 'format and reinstall'. This is not advisable for a beginner, unless absolutely necessary. If you have a restoration CD you can do this with it.
  • JeroldL

    1 Rookie

    •

    44 Posts

    537

    0

    Posted November 3rd, 2000 13:00

    What system do you have? I just did a clean setup of W2K Pro on my brand new Dimension4100.
    I wanted to repartition the HD into smaller partitions for easier file management and I could save you the trouble of talking to the DELL Tech support if you have the same system setup.

    BTW, I like to totally strip down the installation and I didn't like all of the extra folders that DELL installs...\backup, \DELL, \I386, \Drivers. THe tech support people say that some of these folders hold the info for restoring the factory installation. If that is where you want to be again.

    Since I wanted to repartition, I lost these folders and I have to manually track down the correct drivers.

    The basic W2K setup is straightforward, but with a clean install, I don't have the DELL background and startup screens that came with the system.

    Reply to this post and I will try to help.
    JeroldERK@aol.com
  • armed_1

    4 Posts

    537

    0

    Posted November 4th, 2000 04:00

    The best way is to restart into DOS mode and type in zztop at the promt that will do a complete recovery, ( if you are using a 4100)
  • Boy1411

    3 Posts

    537

    0

    Posted November 4th, 2000 12:00

    Thank you very much for replying me. Well, i've just format my computer which is a brand new XPS B1000 due to some programs which i had downloaded from the internet which i no longer need. However it was very complicated for me to install win98 since i wasn't given a start up disc. If you could assist me i would be very grateful and thank you for your recent reply.
  • JeroldL

    1 Rookie

    •

    44 Posts

    537

    0

    Posted November 4th, 2000 20:00

    If you just want to get back the factory installation, I would take the advice of using the zztop. I am not familiar with that program though, but I suspect that it is a factory disk image that will take you to the point of how the system came when you first got it.

    My system is the Dimension 4100 with W2K Por on it and I am not sure if we would have the same Setup Criterias.

    For my system, I had formatted the disk and repartitioned the HD into smaller partitions. I do this for easier file management. I like to keep my work data in a smaller drive, the OS and installed programs on the C drive and and extra drive for miscellaneous data. I divided my 30GB drive into 18GB, 8.5GB and the rest is the smallest where I keep my data.

    Anyway, for mine, all I needed was the DELL recovery CD. This is basically the WINDOWS 2000 CD with a DELL label on it. Yours might be the same with your OS on it.
    Put that CD into your CD-Rom drive and startup the machine. As soon as you hear the HD start spinning and the fans going, press the DEL button on your keyboard (about once every 2-3 sec) until the BIOS setup screen shows up. Using the arrow keys on your keyboard move over to the BOOT menu and you will see in the middel of the screen a series of lists saying:

    1st Boot Device ___
    2nd Boot device___
    3rd.....
    and so on...

    You want to highlight the 1st Boot device (It usually says FLOPPY) and hit ENTER. An options screen will pop up and select ATAPI CDROM. Hit Enter.
    Press F10 and ENTER twice to save changes and exit the BIOS setup.
    WARNING: BE VERY CAREFUL WITH SELECTING OPTIONS IN BIOS SETUP. A WRONG SELECTION ANYWHERE MAY CAUSE THE SYSTEM NOT TO BOOT UP AT ALL AND SCREW UP THE MOTHERBOARD.

    When you exit, the system will reboot itself and boot to the CD-ROm drive.
    If your recovery CD is like mine, it will detect an operating system on the machine and ask you if you want to upgrade, repair or do a clean install of the OS. Select which one you want and just follow the on screen directions.

    Remember: IF you are installing WINDOWS 2000 Professional, you can repartition and reformat the disk during setup. I don't know about W2000ME though. In WIN98, you have to partition (FDISK in DOS) and format the disk prior to setup.

    Check your DELL RESOURCE CD for your system drivers. After SETUP is complete and you are ready to install the hardware drivers, look to see if your system has drivers for the INTEL Chipset. In my case I needed to install the INTEL 815 Chipset driver.
    You need to load this first before any of the other ones, then just load everything you need to. As you load drivers, check in the \control panel\system\device manager folder for devices that need drivers or have conflicts in case you forget to load a network card or a modem driver or something. It is good way to check if all went well during loading.

    Good luck.
  • armed_1

    4 Posts

    537

    0

    Posted November 4th, 2000 21:00

    No Text