
UNSOLVED
How to invoke 'PC Restore by Symantec' on XPS 410 - CTRL + F11 doesn't work
I have an XPS 410 PC (XP Media Center) and I am trying to restore it to original factory setup.
Can I restore it without the recovery disc (I don't one and I ordered it today from Dell)?. I searched the tech support on dell web site and I am not able to get PC restore working using the procedure Dell listed.
Please help!
Responses (4)
Solutions (0)
@Anonymous-ChrisM wrote:
dnaren,
WHAT CAN CAUSE PC RESTORE TO FAIL?
1 - If the hidden DSR (Dell System Restore) partition is removed
2 - If the MBR (Master Boot Record) is modified in any way (such as if you load the Vista Upgrade over XP)
3 - If you change the MBR but the pointers to the DSR partition are left, the DSR will boot, detect that the MBR has changes, and flash a screen that informs you that the MBR has changed and that image restore will not run
4 - If you create additional partitions, changing the MBR, Dell PC Restore will be disabled to prevent it from overwriting these partitions that may contain critical data during a restore operation
5 - If you add a second SATA drive and migrate to a RAID array using the Intel applications accelerator in windows, running PC Restore will put the image back on C:\, but the system will not boot since the boot sector is looking for the ATA driver (factory image) and the bios is looking for the RAID driver (migrated configuration)
If any of these occur, you cannot set the system back to Factory condition. You must manually load the operating system, drivers, and all application software.
Items 2 and 4 are true in my case. I am left with the option of manually loading the OS, drivers etc.Now the question is - Does the Dell backup CD contain everything that is needed to load the OS and the drivers? Is it just a matter of booting from the backup CD and go with the install from there?Do I need to use a floppy disc (and a floppy drive) with Intel SATA/RAID dirver?Thanks for the quick response.

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
406
0
Posted April 8th, 2008 20:00
WHAT CAN CAUSE PC RESTORE TO FAIL?
- If the hidden DSR (Dell System Restore) partition is removed
- If the MBR (Master Boot Record) is modified in any way (such as if you load the Vista Upgrade over XP)
- If you change the MBR but the pointers to the DSR partition are left, the DSR will boot, detect that the MBR has changes, and flash a screen that informs you that the MBR has changed and that image restore will not run
- If you create additional partitions, changing the MBR, Dell PC Restore will be disabled to prevent it from overwriting these partitions that may contain critical data during a restore operation
- If you add a second SATA drive and migrate to a RAID array using the Intel applications accelerator in windows, running PC Restore will put the image back on C:\, but the system will not boot since the boot sector is looking for the ATA driver (factory image) and the bios is looking for the RAID driver (migrated configuration)
If any of these occur, you cannot set the system back to Factory condition. You must manually load the operating system, drivers, and all application software.
DELL-Chris M (old account)
#IWork4Dell