UNSOLVED

john_drake

updated

19 years ago

J

john_drake

11 Posts

0

7056

May 7th, 2008 16:00

Hard Drive Keeps Vanishing (XPS 630)

Very odd happening with one of the SATA hard drives I added to my system, I installed a Western Digital (WD50000AKS-75TMA) removed from another PC, it has been working fine in my XPS 630 but in the last couple of days it keeps vanishing from ‘Device Manager’. It is not recognised under the system Bios either now! When I click on check plug and play components in ‘Device Manager’ sometimes it returns, but after a short time it disappears again. In case it was a cable problem I swapped it with another drive from an external enclosure, the drive from the enclosure (Seagate) is recognised without problem by ‘Device Manager’ and the Western Digital seems to be working fine via the enclosure and USB. I thought about updating my Bios to 1.0.4 (still on 1.0.1) but as I have not had the “fans” problem I’m loathed to risk it.

 

Any suggestions as to why the drive now won’t now be recognised under Vista, after working fine for a few weeks. Is the drive on the way out? It is not making an odd noises etc. Thoughts welcome!

Message Edited by john_drake on 05-07-2008 06:20 PM
Message Edited by john_drake on 05-07-2008 06:59 PM
  • Mr. Scary

    2 Intern

    •

    597 Posts

    319

    0

    Posted May 7th, 2008 17:00

    it's no big deal for me right at the moment but i too have the disappearing drive thing only mine is a 500gb external.  sometimes it's there sometimes it ain't.  i can uplug it and hear the dingding and then plug it back in and here the dingding andit comes back.  don't know what that dealio is all about but i think it's definetly Vista!  just my .02
  • djcypher

    190 Posts

    319

    0

    Posted May 7th, 2008 23:00

    I've had that happen too with an external firewire drive.  I'm running XP pro no Vista.  I also just unplug/replug and it appears.  An internal drive doing that may be a problem though since it's connected directly to the mobo via the SATA interface.  I don't have a definite answer, but check in your BIOS to make sure all SATA's are enabled.  Also, you may want to check your drive jumpers.
  • john_drake

    11 Posts

    319

    0

    Posted May 8th, 2008 10:00

    Thanks for the replies gents, this is an odd one. Since swapping them over the Seagate works fine in the PC and the Western Digital is running fine as an external via USB. More Vista oddness I suspect.