
UNSOLVED
Frying BFG 6600GT cards left and right in my 4700
Alright, here is the abbreviated story which starts 3 months ago...
After struggling with the x700 pro initially with my 4700, I switched to the BFG 6600GT PCI-e. That card worked fine with BFV but with Farcry, I would get crazy coloring artifacts. One night after playing for roughly an hour, the computer shuts down and would not start with the vid card plugged in. I was able to get the computer on by removing the card. I have a suspicion that I have already fried the card at this point.
After contacting tech support (both BFG and Dell), it was suggested that the power supply might be insufficient. I added 2 sticks of ram, a second DVD drive, and a few USB devices to the comp. So I go out and get an Antec 500w PSU and plug it in with out the video card to test it out and it works. I plug the video card in and all of a sudden, I hear this crazy buzzing sound and I see smoke coming out of the vid card!. So I return the card and BFG sends me a replacement.
I plug the new card in and lo and behold, it works! I was able to get everything running and even played the demo for BF2 for a few minutes. However, 10 minutes into the game, on high video settings, the computer shuts down again. This time, when I hit the power button, I hear the buzzing noise again, a big puff of smoke comes out of the computer, but the computer boots on. Of course, I can't see anything until I plug the monitor into the integrated graphics port.
So basically, I am running on the integrated video again, having already fried 2 BFG 6600GTs (thank goodness for lifetime warranties). While BFG has been good about the replacements, I doubt they will keep sending me new cards if I keep frying them. Does anybody have any idea what the problem could be? My last course of action is to buy a new case and motherboard.
The specs on the comp are P4 2.8gHz, 1GB DDR2, 80 GB SATA, integrated sound and video, Antec 500w PSU.
Thanks!
Responses (38)
Solutions (0)
I can't tell really. I suppose it might be. With the first video card, I was idling at ~50C, but this time around, it was a little warmer. I'm guessing it might have been due to the new PSU since it's 500w. It has 2 fans, but one of them doesn't turn on until it gets warm enough.
When I was testing it out, I ran the BF2 demo for a few minutes and checked the temp right afterwards and it was at 66C. This was after only a few minutes.
I took the modem out so there is nothing directly underneath the video card. I was going to install a pci exhaust fan, but I didn't have a chance to.
barrance:
The two obvious potential problem areas are power and heat/ventilation. Your new PSU rules out the potential power issue, so it would seem that heat/ventilation is the only obvious suspect remaining. There are numerous past postings about ventilation issues with the D4700. Using the term "4700 heat" in the search function, revealed this thread (from among many), that may be of use to you: http://forums.us.dell.com/supportforums/board/message?board.id=dim_video&message.id=99914&query.id=182274#M99914 . You should consider reviewing past forum postings for more info.
Other forum members may have other ideas. I hope you resolve your issue and are able to enjoy your machine.
Good luck,:smileyhappy:
B4runo
DIMM 4400
BIOS – A06, date 6/12/02
Win XP Home Edition, SP2
Pentium-4 2.8 GHz, 400MHz FSB, 512K L2
1 GB DDR SRAM PC2100
80GB WD 7200RPM, 200GB WD 7200RPM EIDE/ATA HDDs
Iomega 80GB USB 2.0 External HDD
Pioneer DVR-109BK, Samsung DVD-ROM SD-616R
Leadtek GeForce 6600 GT 128MB DDR 8X AGP
17”, 1702FP Digital Flat Panel Display
PCP&C Turbo-Cool 425 Deluxe Dell PSU
SIIG US2275 USB 2.0 / 1394a / NIC PCI card
Courteous Dell Community Forum members search first, then post.Wow, you got an Antec PSU to work with your Dell? I thought that Dell computers can only use a certain kind of power supply? Guess you're lucky...
BTW, isn't there a switch on the back of the PSU that the Dell case can't compensate for?
Message Edited by df96817 on 07-05-2005 04:30 PM
CSPlayer089
563 Posts
690
0
Posted July 5th, 2005 21:00
try a PCI slot fan, or a VGA cooler for the 6600GT from Arctic Coolingweatherman1
3 Posts
690
0
Posted July 6th, 2005 02:00
Barrance,
I think this has to do with the PSU, Dell PSU's are tricky & you cannot simply replace it with any old PSU.
I have a Dimension 8300 2.8GHz P4 with a BFG 6800 GT OC, I upgraded the PSU from one that came from pcpowercooling.com, they custom make PSU for Dell units, they also slot right in. I think this is the problem you have, the PSU you have replaced may not suit for the motherboard you have. I nearly made the exact mistake, lucky I didn't, now I know what will happen.
All I know is, not BFG card that is the problem, its the PSU, or you have connected something incorrectly.
Go to this link: http://www.pcpowercooling.com/products/viewproduct.php?show=S47D
This PSU has your name all over it.
PS: I fear you may have fried a lot more than the video card aswell, I would be careful.
Good Luck
Brainonska511
1122 Posts
581
0
Posted July 6th, 2005 03:00
Weatherman1:
If you take a look at the back of a Dimension 4700, it appears you can stick in a retail PSU in there since there is an open back where the PSU is.

B4runo
1 Rookie
•
1100 Posts
690
0
Posted July 5th, 2005 16:00