UNSOLVED

dave trader

updated

14 years ago

0

80476

May 16th, 2012 14:00

Everything on Screen too big after upgrading to Windows 7

I have a Dimension 3000 tower that I replaced the monitor on about one year ago.  The replacement screen is a Dell flat screen that I bought off of e-Bay and it worked fine until recently when I upgraded my operating system to Windows 7.  After the upgrade everything on the monitor screen is too large (it looks to be about 150% magnification).  I tried going into the screen resolution view and move the sliding scale to decrease the resolution but there is no sliding scale.   

I don't know if this post belongs in the peripherals or software forum because I may have lost a driver when upgrading to Windows 7. 

Any suggestions would be appreciated- Dave Trader

  • DELL-Saurabh A

    4 Apprentice

    •

    710 Posts

    2213

    1

    Posted June 4th, 2012 21:00

    Hi dave trader,

    Welcome to the Community.

    If I understand you correctly, after upgrading the operating system to windows 7, the screen display of your computer (dimension 3000) seems out of proportion. The issue is not with the Dell flat panel screen. The display is disproportionate because you have not yet installed the appropriate video drivers that are compatible to windows 7. In order to fix the issue, you will have to install the windows 7 compatible, video card and chipset drivers.

    Please follow the following steps:

    Step 1: In order to find the appropriate driver please run the Intel Driver Update Utility. Please follow the following link: http://intel.ly/l2CHxY

    The utility will evaluate your computer’s hardware and software, both. For example: Chipset, Graphic Driver Version, Operating System Version, etc. And based on the evaluation, will provide you with download links of the ideal drivers.

    Step 2: Please follow the instructions and follow-through with the installations of the recommended drivers.

    Step 3: In case you face any issue with the Intel Driver Update Utility, please use the Intel’s Download Center to manually search for the appropriate driver software.

    To Install the Chipset (R58201_ZPE.exe) driver, please use the link: http://dell.to/KbyZhS

    Depending upon the exact hardware specification of your computer, it is still possible that you may not be able to find a video driver that works with windows 7, on your computer. As the make and design of Dimension 3000 is fairly old now, it may be your system’s limitation to be effectively used with windows 7.

    The above mentioned steps still maximize your chances to be able to use your system with windows 7. It will be worth a try!

    Thank You,

    Saurabh

    Social Outreach Professional

    You can reach us at http://en.community.dell.com

  • 2213

    0

    Posted June 5th, 2012 00:00

    Check your GPU settings and see if you can change the resolution of your monitor screen.

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    2213

    0

    Posted June 6th, 2012 00:00

    I'm not sure if a Windows 7 driver is available for your onboard GPU. In that event, I suggest a discrete video card like the Sparkle 8400GS PCI.

    Not only is the Sparkle Windows 7-compatible, but it fully accelerates HD video (including Flash) and boasts a native HDMI connector and onboard audio device (if your monitor has built-in speakers).