UNSOLVED

whoiz

updated

20 years ago

W

whoiz

36 Posts

0

12613

January 17th, 2007 13:00

displaying on TV and monitor

I have a 1703FP digital monitor. I am trying to display on both TV via/s video and monitor at the same time.  So far all I seem to have accomplish is one or the other depending on which is plug in to the PC at boot up but never both at the same time. I tried combination of unplugging a reconnecting and I cannot get both to display at the same time. Is it even possible? I apologize if I am at the wrong forum for this question but plz direct me to the proper one if I am.

Thanks

Gary

ps it uses NVIDIA GeForce FX5200

Message Edited by whoiz on 01-17-200710:09 AM

  • 600

    0

    Posted January 17th, 2007 20:00

    may just be a card limitation. i had a video card once that the instructions said it couldnt do that (Radeon 9500 IIRC), because it would put too much of an electricity drain on the card
  • whoiz

    36 Posts

    600

    0

    Posted January 17th, 2007 20:00

    I have not been able to locate mutilble monitor settings. I went to display/setting/ advanced//FX5200 and all I have is performance ,overlays and refresh rate. Am I looking in the right area? Thanks again
    Gary
  • gpro

    2 Intern

    •

    2024 Posts

    600

    0

    Posted January 17th, 2007 20:00

    My FX5200 can do it. Check the multiple display settings in Display Properties.

    Multi-monitor FAQ
  • whoiz

    36 Posts

    600

    0

    Posted January 17th, 2007 20:00

    i will chek uot the FAQ. thanks
  • gpro

    2 Intern

    •

    2024 Posts

    600

    0

    Posted January 18th, 2007 09:00

    If you are using the old nVIDIA control panel, you should see something like on this page, except your secondary monitor should say TV.

    Download the latest ForceWare drivers and Manual here.
  • whoiz

    36 Posts

    600

    0

    Posted January 18th, 2007 09:00

    I got it working. Thanks alot