
UNSOLVED
Dimension E520 and Windows 7 64 Bit
Hello
I am new to the desktop forum, I have a dimension E520 currently running XP Pro 3 Gig RAM I am hoping to upgrade to Windows 7 64 bit so I can take advantage of more RAM I have 4 slots and hoping to go to 8 GIG RAM. Have any one tried that and did it work. I know there are different version of the E520 below is some of the data from my WINMSD output
System Model Dell DM061
System Type X86-based PC
Processor x86 Family 15 Model 4 Stepping 9 GenuineIntel ~3059 Mhz
BIOS Version/Date Dell Inc. 2.0.5, 11/30/2006
SMBIOS Version 2.3
Any help will be appreciated.
Thanks
mmajzoub
Responses (60)
Solutions (0)
Welcome to the forum. We are users helping users here.
The Dell manual lists the different CPU's that the E520's came with however it ONLY has one listing for the memory four 1 GB modules for total of 4GB. However, Crucial, which guarantees their memory will work in Dell's lists four 2GB modules for a total of 8 GB..
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio applicationDell lists Vista 64 bit drivers for your PC so it will run 64 bit OS. I have an E510 which is an earlier model of your E520 and it will run 64 bit OS, although I'm only running Vista 32 bit on it.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio applicationI've got the exact same system and am running Windows 7 64 bit no problem. You will need to update the BIOS and the update is on the dell support site.
Once installed I did a "Windows experience index" text and got a rating of 3.6 (which i know isnt great) but the limiting factor was the graphics card (ATI Radeon x600). Individual scores as follows:
Processor: 4.5
RAM: 5.4
Graphics: 3.7
Gaming: 3.6
Hard Drives: 5.9I plan to upgrade the graphics card to comething newer and see if this makes a difference. Machine is as follows.
OS: Win 7 64 bit (6.1, build 7600)
System model: Dell DM061
Processor: Pentium D, 2.8ghz
Memory: 4096 MbytesHope that helps.
Moo!Hi,
I also have a dimension E520 and am running windows 7 64 bit on it. CPU is Intel pentium D945. Upgraded BIOS to 2.4.0 24/5/07
I want to upgrade my ram to 8gb. I have bought 4 x 2g corsair pc2-5300 DDR2 and have replaced slots 2 and 4 with the 2gb ram and left the original 1gb ram in slots 1 and 3.
The system recognizes the 2gb ram ok but only the one in slot 2. It still says it has 4 gb ram. The BIOS say max ram is 4gb. When I run the Crucial test it says max ram for this machine is 8gb and I'm running 4gb.
Does anyone successfully have 8gb ram running in their E520??
Cheers,
kk13
Hi kk13,
It's always best to check your manual when performing hardware upgrades. Your manual says:
The recommended memory configurations are:
or
Thanks Osprey,
Lesson for me there I guess. I googled and came up with 1 and 3 and 2 and 4 didn't really take in what was said in the manual :S
Since then I have tried many different configurations and have managed to get 7gb installed. I have replaced the 1gb in slots 1, 2 and 3 with the 2gb ones but whenever I try and put the last 2gb in slot 4 the computer starts but doesn't boot. I've tried swapping the rams over in case one was bad but thats not it. I've tried just having 4gb as 2gb each in slots 1 and 2 restarting (which is fine) and then adding the extra 2x2gb in slots 3 and 4 but it wont boot. when I swap the 2gb in slot 4 for 1gb it works ok and recognizes 7gb.
Any suggestions would be greatly appreciated.
Cheers,
kk13
Yes. I have an E520 (Core2, 2.13Ghz) and am now running Windows 7 (64 bit) - I upgraded this week. I also just upgraded my memory to 6GB with two Kingston 2GB modules (KTD-DM8400B/3G) from Newegg. I had a 3GB configuration and kept the 1GB DIMMs in slots 1 & 3. The 2GB DIMMs are now in slots 2&4. The system came up immediately and recognized 6GB. I then increased my pagefile (virtual memory) to 9GB. I stuck with the 667Mhz DIMMs. This system is now flying again.

speedstep
11 Legend
•
46969 Posts
4395
0
Posted January 6th, 2011 11:00
The answer may be that You cannot do either.
Your Max Ram is 8gig and your CPU must be 64 bit.
You must have a 64 bit CPU to work with 64 bit Windows.
With an updated bios you may be able to use a 64 Bit smithfield.
BX80551PG2800FT (SL88T, SL8CP)
I would recommend buying the Windows 7 Family pack at $149
Windows® 7 Family Pack
Upgrade 3 PCs to Windows 7 Home Premium for $149.99.
it comes with both 32 and 64 bit Windows 7.
Retail Versions of Windows 7 ultimate also come with both 32 and 64 bit media.
If you do not have a 64 bit processor then the 64 bit DVD for XP or VISTA or Windows 7 will not finish booting and have an error about requiring a 64 bit processor.
Crucial Lists 8 gigs max with 2 PAIRS
All Dell Dimension E520 Memory Upgrades (RAM) / CT1446452
Memory Upgrade for the Dell Dimension E520 Desktop/PC
Q: Will my system recognize the maximum upgrade?
A: Possibly
How much memory your Windows OS will recognize depends on which version of Windows you are running. 32-bit versions of Windows will see (and utilize) only 3GB or 3.5GB. To utilize more memory, install a 64-bit version of your OS. More information about OS memory maximums can be found at http://www.crucial.com/kb/answer.aspx?qid=4251.