UNSOLVED

wconk

updated

22 years ago

W

wconk

20 Posts

0

3519

July 23rd, 2004 06:00

Dimension 8400 Impressions

I got my 8400 today. It has the 530 (3.0 GHz) processor, DVD+RW and DVD drive, 300SE video, SATA 80GB hard drive.

Here are my initial impressions. It's much better than my last (homebuilt but ancient) computer. It is very quiet. I don't like the case much, because while the clamshell setup is innovative and convenient to install drives, it seems somewhat low quality. Also, the rounded front cover makes it difficult to reach the drive open/shut buttons. The motherboard is not for enthusiasts (although this is not a detraction, I knew this beforehand and chose price over adjustability). Dell installs alot of extraneous software like Media Center which is annoying, but there is also a good portion of very usable software like Microsoft Encarta.

I first installed another drive which had been in my old computer, a 160GB ATA drive. I only realized today that the motherboard only has one Parallel IDE port, which was used by the two DVD drives. So I had to install the Promise Ultra 133TX2 IDE controller that had also been in my old machine. This went smoothly with no issues. However, installing the YE Data 5 in 1 media card reader/3.5 floppy drive was not as successful. I have found that there is no internal USB port on this motherboard, so while the floppy is installed and functional, the media card reader function is not available. I will have to buy a PCI card with internal USB ports for this function.

On a side note, I called Dell tech support, supposing I would give them a try and ask if Dell sold a media card reader and how it was connected if so. The strongly accented but polite young lady who answered my call had no idea what I was talking about, even saying at one point that I "needed a PCI connector to attach to the CPU"..  ??  So much for the 'technical' in technical support, eh?  I didn't expect more.

I got the PC with the free 17" flat monitor, a E172FP. It is set at 1024X768 resolution and 32M colors, but the picture just seems poor compared to the 17" CRT connected to my older machine. This is my first experience with LCD's, is this normal? I will try a higher resolution next.

Overall, it is an astoundingly capable PC for the low price I paid ($1267) considering I got the PC, monitor and 3 in 1 printer for that money. I like it very much and I'm happy I bought it. Also, while I saw many forum members who have had delays with their PC, this one was shipped on time. All in all I'm pleased with the experience, despite the (lack) of tech support.

I hope this diatribe helps some people out.


Wes

  • wfcr

    39 Posts

    162

    0

    Posted July 23rd, 2004 07:00

    Was going to post my observations as well. Got mine this week and must agree with you on the monitor. Quite poor quality picture. I had to go to the highest resolution to see better results, but then I need a magnifying glass to read the darn thing. Very disappointed in this.

    The computer case looks and feels flimsy. I haven't gone inside yet. Like you I had sort of hoped a media reader would be included as this seems pretty standard in the industry now. As for the tech person not knowing what it was, well no surprises there.

    What absolutely astounds me is which design genius came up with the two angled down USB ports in the front. What a pain in the rear to plug cables in. It should have been straight type plugs.

  • 162

    0

    Posted July 23rd, 2004 10:00

    i recieved mine yesterday evening and once i spent an hour setting up things the way i wanted(which consisted of removing all the aforementioned useless programs, startups and services in xp) i have to say i like it much better than the last machine i built which had nearly the same specs.

    the only hardware changes i made was adding a pair of 36 gb raptors for a raid 0 config for all my games. i had to remove the rails from the original sata drive and use the floppy rails for it and put it in the floppy bay as the machine unfortunately only technically has room for 2 hard drives(which i am ok with but i wanted my raptors in it:)

    as for the jump to the x800xt over my 5700 ultra...well...my aquamarks for the 5700 were 30,117 and the x800xt was 51,658 right off the bat. cant argue there.

    lastly im still having to get over the noise difference. im used to having a giant case with about 10 fans running which tends to get a bit loud and now i can hardly tell the machine is on. im very impressed with the fact that dell decided to use a very good cpu heatsink as opposed to the stock intel one.

    my free 17" flat panel is still in the box next to the printer as i really dont have a use for it at the moment. i already had another 17"lcd i was using before next to my 19" samsung crt. i had upgraded from these to the 2001fp last week and im more than happy with it.

    for the price, convenience and mine arrived 4 days early...cant beat it.

    thanks dell:)
  • sgrby877

    39 Posts

    162

    0

    Posted July 24th, 2004 05:00

    For starters, most lcd monitors have an optimal resolution, I have the 1703fp monitor and the optimal resolution is 1280x1024 and because of this, any other resolution looks blurry or somewhat distorted.  I was fortunate enough to order the 8400 early so now I have an x800 xt video card in my computer.  The 8400 is surprisingly quiet compared to my old computer and although the drives are ackward to access, it doesn't seem annoying.  I really don't care about the looks of the computer because I prefer to have power that is sittin inside because I love playin unreal 2004 with over 100 frames per second.

    =D

  • giadinh

    75 Posts

    162

    0

    Posted July 26th, 2004 22:00

    Just a question regarding your post of removing the useless softwares. 

    Could you please list them.  I don't have a clue as to what is really necessary to keep the computer running smoothly?  My computer is used for photoshop, some DVD viewing, some music, and internet.

    Thanks.

  • bobjbkln

    24 Posts

    162

    0

    Posted July 27th, 2004 16:00

    Yes, the computer  with the 3.0 GB processor and 1 G RAM, is very quiet and very fast (compared to my previous 500 MHZ HP).  The looks are fine to me and I was amazed how easy it was to get into the case.  I bought a 3rd party LCD monitor (PyxScape) which looks great at the 1280 X 1024 native resolution.

    My plan was to get rid of all the junk and partition the 80 hard drive in 4 additional logical drives, by reformatting and reinstalling the OS.  Turns out that was a lot hard than expected since the reinstall CD is not set up for SATA hard drives.  The instructions in the Manual are completely wrong and so are the third party ones on the net people referred me to.  It took several calls to tech support to get them to take me through the process which they learned through trial and error with me.  It involves extracting RAID/SATA drivers to a floppy (if you have one, it's an add-on on the 8400)  changing an SATA Operations setting in the BIOS, then running the reinstall, inserting the floppy when necessary.  When completed, you can then just reinstall the drivers and avoid any of the AOL/Media/PSP/Norton trial software that came preloaded.

    Having partially recovered from that ordeal, I am now pleased with the computer.