
UNSOLVED
A
acorns1023
27 Posts
0
22849
January 12th, 2006 14:00
Dimension 4700, Power Supply, GeForce 6800 GS
I am really confused. But I think my questions are relatively straightforward.
The computer that I have is this:
Dim 4700, 3.0Ghz HT, 800 MHz FSB
1GB RAM, 4x256 (400 MHz)
128 MB Radeon x300 SE
SB Audigy 2 ZS
160 GB HD 7200 rpm.
17inch analog flatpanel
Dual DVD Rom/DVD +/- RW +R
I would like to buy an eVGA GeForce 6800 GS (PCIe x16 interface 256 RAM, DDR3). It is not overclocked (425 MHz core clocking), and I am not planning on overclocking.
eVGA 256-P2-N386 Geforce 6800GS 256MB GDDR3 PCI Express x16
1. Will my computer be able to handle the card, in terms of power supply.
2. If so, do I need additional cooling. If I need additional cooling, will the additional cooling necessitate a new power supply.
3. If I do need a new power supply, can I buy one from Dell?
4. If my computer is able to handle the card, then is there anything else I need to worry about for installation other than the nVidia drivers? (Bios upgrade, additional power cabling, etc.)
Thanks a bunch.
acorns1023
Responses (25)
Solutions (0)
acorns1023
27 Posts
946
0
Posted January 12th, 2006 15:00
Thanks guys.Cypherus:question:I just read on the forums that a guy (mike the chemist) bought probably the same video card as me from newegg.com, for his Dell E510 computer.here's what he wrote :
The 6800GS requires a 6-pin PCI Express power connection, which I don't have. The card also came with an adaptor, however, that allows you to use two x 4-pin molex connectors instead of the 6-pin connector if necessary. Unfortunately, my Dell power supply only has a total of two x 4-pin molex connectors, and one is going to the CD/DVD drive, so that only leaves me with one spare connector.
I have a 305 watt power supply, and the card requires 350 watts, so that was reason number two. I'm not sure about how Dell measures their power compared to everyone else, but I have read enough messages in the upgrade forum to see that some people are having video card problems due to lack of power. It could be that they have older systems and lower wattage power supplies, but since I didn't have the ability to plug in the card to try it out, I went for the upgrade.
I purchased an OCZ ModStream 450 watt power supply, and it was a tight fit, but it's working fine in my E510. My Video card is the Evga GeForce 6800GS. Both were purchased from NewEgg.
One more comment - I can hear some fan noise now, probably from the small, high rpm, GPU fan. Not enough to be annoying, just enough to be noticable, where as the original power supply and on-board graphics were completely silent. It's a small price to pay for the increase in performance!
So,
1. Do I need a 6-pin PCI Express power connection, if my Dell 4700 doesn't come with one?
2. If I don't have a 6-pin PCI Express power connector, then do I have two x 4-pin molex connectors free for use?
My setup: 160 GB SATA, DVD Rom Drive, DVD +/-RW+R.
Thanks in advance,
acorns1023
reverseswing200
60 Posts
946
0
Posted January 12th, 2006 15:00
Well, there is no way you can buy a 350w power supply from dell for a dimension 4700 due to the chasis it uses. The only way you can lay your hands on a psu >r than 305w is from a third party for a 212 Mitac chasis.This is the chasis that dell uses for a dimension 4700.
See if others know of a place where you can buy 350w or 400w psu for a 212 mitac chasis.
acorns1023
27 Posts
945
0
Posted January 12th, 2006 16:00
UT, are you saying that my 4700 has only 2 molex 4 pin connectors and that both are being used by my optical drives?There are no other connectors?If this is true, (I can not check until I get home tonight), then that means that Dell did not put in enough connectors to power the video card? I guess this means that the Radeon x300 SE didn't need a power cable in the first place?1 connector to the harddisk1 connector to the sound card1 connector to the dvd rom1 connector to the dvd r/w1 connector to the video card?If there are only 4 connectors, then I guess I need 2 Y splitters, 1 for each optical drive connector. Then I take 1 Y splitter and connect both optical drives to it, and take the other 4 pin molex and connect the video card to it.... would that work?- Since you have two optical drives then i can guess that you dont have any free 4 pin molex cables.
I believe there is an adaption you can buy which converts a male molex cable into two female molex connectors.
You then get the Y splitter cable from the card and connect that to the 2 free female connectors
Only problem is that i think you'll have to loose one of your drives - Thats correct yes....the x300 doesnt need the extra power connection.
The only good cards i know which dont need a extra power connection are the Nvidia 6600GT and the Sapphire Radeon X800 XL.
Both are real good cards...they'll be able to run most games....but they arnt as good as the 6800GS
P.S...that may work....but im not 100% sureMessage Edited by UT2005 on 01-12-2006 02:01 PM
acorns1023
27 Posts
945
0
Posted January 12th, 2006 18:00
Sigh... what a problem. I'm not sure what to do now.Do I keep the card, and try to find a bigger power supply that will still fit the 4700, or should I just return the card, and settle for a 6600 GT?this has not been a good day...acorns1023- Well since you bought the card....you could get rid of one of those drives....i mean a DVD RW does pretty much everythin anyways...so u dont really need the DVD ROM Drive.
Or your best bet would be to take the card back and swap it for one which doesn't need an extra power connection. vaporvsvirus
18 Posts
945
0
Posted January 12th, 2006 19:00
I have the EXACT same problem as you. If you want my opinion, go with the 6600GT. It's an exellent card, and im very, very satisfied.

acorns1023
27 Posts
946
0
Posted January 12th, 2006 14:00