
UNSOLVED
CMOS Battery
My Dimension 8100 is a little past its 5th anniversary. It still has its original CMOS battery installed. I am having no noticeable problems with boot ups/shut downs, time/date, etc. Should the battery be changed in anticipation of its finally dying, or is it best to just go 'til it starts failing? And does changing the battery wipe the CMOS settings and revert to the factory default settings?
Responses (3)
Solutions (0)
- Remember the old adage - "If it ain't broke, don't fix it"
I've got some computers over 8 years old still on original battery. For that matter, in over 20 years of PC use, I can only recall changing out maybe two batteries, and I keep things around a long time.
If you're concerned, I'd go into the BIOS and make note of all the configuration settings you've made (different from the defaults) and keep that tucked away. When you notice the battery failing (generally clock incorrect at cold start is most obvious symptom), then put in a replacement.
Just my 2 cents
Val

ejn63
11 Legend
•
87469 Posts
•
321256 Points
181
0
Posted December 5th, 2006 12:00
Yes, you'll lose the CMOS settings when you change the battery.