UNSOLVED

PsYpHeN

updated

22 years ago

P

PsYpHeN

5 Posts

0

13750

May 25th, 2005 12:00

Boot order on dimension 2400

I have a dimension 2400 with a 2nd hdd that I am trying to quad boot and I need to change the boot order in bios to boot from my 2nd hdd. I have been unable to find a setting for this and am now wondering if it isnt due to the fact I have both hdds on the same IDE (primary). Would bios pick up my 2nd hdd as another boot device if I changed it to the secondary IDE? or am I out of luck? Thanks
  • acidshadow

    43 Posts

    449

    0

    Posted May 25th, 2005 13:00

    Highlight boot sequence in the bios and press enter. You shoudle be able to change the boot order by pressing the + and - keys to move the device up or down in the list.
  • acidshadow

    43 Posts

    449

    0

    Posted May 25th, 2005 13:00

    Yea.. was afraid of that. Set the drive that you want to boot from as the master drive and the other as the slave.. that will work. You have an os installed of both dries correct?
  • PsYpHeN

    5 Posts

    449

    0

    Posted May 25th, 2005 13:00

    I only have 3 three devices to chose from (floppy,hard drive c:, and cdrom). My 2nd hard drive doesn't show up in the menu.
  • PsYpHeN

    5 Posts

    449

    0

    Posted May 25th, 2005 14:00

    Yes I have OSs on both drives with Solaris on the first partition of my 2nd hdd. I am having problems with configuring it so maybe swapping them around will work.
  • acidshadow

    43 Posts

    449

    0

    Posted May 25th, 2005 15:00

    That should work.....if not you might have to configure the boot.ini file to be able to dual boot.