UNSOLVED

Wrong_Number

updated

18 years ago

0

4886

October 28th, 2008 02:00

9150 Won't power up. No lights

I have a 2 year old 9150 which won’t power on.

 

The LED on the MB stays on as long as the power cord from the wall is plugged in.

When I plug it in the lights sequence on the front panel (1,2,3) then go out.

When I press the switch (I get a positive mechanical feel and hear the click) NOTHING.    No lights what so ever (except the led on the MB).

 

If I disconnect the power cable for 10-20 seconds (until the MB LED goes out) and then reconnect it the 1,2,3 HD lights sequence  and then go out.

 

I have tried disconnecting everything (including RAM) except he MB .. same thing.

 

When I then disconnect the MB … exact same thing.

 

Suggestions?  Any and all assistance/advice will be greatly appreciated.

  • shesagordie

    12 Elder

    •

    46017 Posts

    348

    1

    Posted October 28th, 2008 02:00

    Wrong_Number

    Check the reading of the power button LED, is it solid green, blinking green, solid amber, blinking amber?

    Diagnostic Codes.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • 348

    1

    Posted October 28th, 2008 10:00

    Power button is dark ... no light or any color.
  • theMart1an

    51 Posts

    348

    1

    Posted October 28th, 2008 11:00

    Replace the motherboard and the power supply...:smileytongue:
  • 348

    1

    Posted October 28th, 2008 15:00

     

    Do you think a PC which is almost 3 years old would be worth the time and COST of replacing the Power Supply and MB .. especially when I’m not sure which, if either, is bad?

     

    The fact the LED on the MB lights when the power cord is plugged in tells me the PC is getting power.

     

    What I don’t know (among many things) is what does it mean when you first plug the power cord in the lights above the front power switch (1,2,3, pic of HD?) flash in some kind of sequence then goes off.   Is this normal?

     

    When I press the power switch I hear and feel (so to speak) the click but NOTHING happens.   The LED in the power switch does not light at all ..

  • shesagordie

    12 Elder

    •

    46017 Posts

    348

    1

    Posted October 28th, 2008 18:00

    Wrong_Number

    Try installing a different power supply.

    The 9150 does not use a Dell proprietary power supply, you can use most standard ATX power supplies with either, a 24-pin or 20+4-pin main motherboard power connector and with a minimum of 2-SATA power connectors.

    As the 9150 has an open back panel, a power supply with or without the on/off switch can be used.

    You should be able to buy a compatible power supply, from most local, or online computer stores.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.