UNSOLVED

fdsa222

updated

19 years ago

F

fdsa222

6 Posts

0

2617

August 6th, 2007 22:00

8800 GTS OC2 640mb slow on XPS410

When i was going to buy this card, I asked all over these forums, and everyone said go for it. They said that the power supply, even though it's under 450watts, would work because Dell under rates them, and that everything else is compatible. Well, it runs slow. I updated drivers, cleaned out old ones, and patched all games. It looks alright, but not nearly as good as it should. I'm actually in the process of dl'n 3Dmark06 right now to get actual numbers. I'm not sure what the problem is, though I found on some message boards that you can change what speed your pci-e slot is running at. Though, I can't find anyway to do it through this Vista maze. Any ideas or help? I've got: Core 2 Duo 2.4 2 gigs ram Creative XB-Xfi sound card (Which pulls even more power from the psu)
  • 336

    0

    Posted August 6th, 2007 22:00

    What driver are you using?
  • 9150_lover

    29 Posts

    336

    0

    Posted August 6th, 2007 23:00

    It may be a bad card. Make sure the pci connector is firmly connected. Make sure the card itself is firmly connected. And please describe 'running slow.' What score are you getting in 3dmark2006? I heard vista has been problematic.
  • contrvlr

    1359 Posts

    336

    0

    Posted August 6th, 2007 23:00

    The psu is certainly not the problem, no matter how many pci cards you have installed.
     The psu is more than enough even for the 8800 GTX that is offered as an option.
    Here's a psu calculator you can use to find out a little about your power consumption
     
    It doesn't include loads for sound cards so just add an extra pci card into the calculation. Keep in mind that a sound card will only add 6-8 watts to the load, with the front bay controls you're looking at 10-12. For comparison a pci modem will add 5-6 watts.
  • fdsa222

    6 Posts

    336

    0

    Posted August 7th, 2007 04:00

    I don't have the exact #'s, but I scored in the high 8,000's. And that's at 1280x1024, while I usually run 1680x1050 on my 20" ultra sharp. Screen shots for the Quake Wars beta look way better than what I can get, oblivion test shots look better with the same card than I can get, and stalker doesn't run too great (though it does have known problems with Vista). I feel that my setup should more than be able to handle these games with settings maxed out.

    I'm using the beta nvidia drivers, cause I've heard they're the best ones out through forums I've check out looking for solutions to the problem.

    What I'm curious of is on other forums people have been saying that 500 watts isn't even enough to power the 8800 640mb GTS overclocked, and the dell psu is 375 watts.

    Also, I'm not really sure about how rails work, but the psu in my xps says 22A max, and I'm pretty sure the GTS needs a 26A max???

    Am I just expecting too much out of the card? It's just really not satisfying that my expensive video card/machine doesn't give me the results I was hoping for. If Vista is the problem, Microsoft needs to do something about their whole new line of games that are "Vista Ready" or whatever if cards can't deal with the os.

    Message Edited by fdsa222 on 08-07-2007 12:33 AM
  • 336

    0

    Posted August 7th, 2007 07:00

    The 375w psu is 28-30amps, I believe it's 30amps
    My 305w psu is 22amps 12v rails 18a + 18a = 264watts max. on the 12v combined rails
    divided by 12 = amps


    Message Edited by kpo127 on 08-07-2007 04:04 AM
  • contrvlr

    1359 Posts

    336

    0

    Posted August 7th, 2007 10:00



    fdsa222 wrote:

    I'm using the beta nvidia drivers, cause I've heard they're the best ones out through forums I've check out looking for solutions to the problem.
     
    I use Beta's myself, always have a better experience with them.

    What I'm curious of is on other forums people have been saying that 500 watts isn't even enough to power the 8800 640mb GTS overclocked, and the dell psu is 375 watts.
     
    You're concentrating on wattage, amperage is the key.

    Also, I'm not really sure about how rails work, but the psu in my xps says 22A max, and I'm pretty sure the GTS needs a 26A max???
     
    The GTS has a system reccomendation of 26 amps, but we do have forum members that are using it with a 22 amp psu. If your psu reads 22 amps there is something wrong because the XPS 410's 375w unit has a combined output of 30 amps.

    Am I just expecting too much out of the card?
     
    Maybe, a  C2D 2.4 and GTS running on XP has an average score of about 8700.

              Opened the box, 22 amp max is on the +5 volt rail, look lower  :smileywink:


    Message Edited by contrvlr on 08-07-2007 06:05 AM
  • fdsa222

    6 Posts

    336

    0

    Posted August 7th, 2007 14:00

    Alright, I guess I was just expecting too much. People are easily getting those scores with a 320mb on some other forums, I kind of wish I bought one of those instead of the 640mb. What were your scores on 3DMark06?
  • contrvlr

    1359 Posts

    336

    0

    Posted August 7th, 2007 14:00

    My scores were around 8700 on XP. The memory on board the card hasn't got much to do with the benchmarks ( the 320 actually scores higher in some than the 640 ).
    The extra memory comes into play when running at higher resolutions.
  • fdsa222

    6 Posts

    336

    0

    Posted August 7th, 2007 15:00

    Alright, makes sense. I'm trying to think of where the bottle neck would be that's keeping scores in the 8,000's when others are getting easily into the 10's. If it can't be processor, or psu, could it be the motherboard or ram? I know Vista is part of the low scores, but even with Vista people have been getting better scores.
  • 92

    0

    Posted August 7th, 2007 17:00

    Maybe another 1GB would help. I went from 2GB to 3GB a couple of months ago. The new WHQL 32bit Vista driver 162.22 added 512mb to my system's available graphics memory. That figure for me now is 1535mb. Like I asked you before, what driver are you using? Beta driver may be the problem. Find a driver that does for you what you want. There are plenty out there. I only use WHQL drivers myself.