
UNSOLVED
670 can't locate hard drives
I have just purchased a used Dell 670, with an old bios (A02), and an imbedded SCSI controller (Adaptec v4.30.4S5). I have installed new SCSI drives. The primary drive is a Seagate ST3146807LW which shows at slot 00, ID 0 and the second drive is a Seagate ST373207LW which shows at slot 00, ID 4. Both have been formatted but I can’t load my OS. When I try to load my MS XP v2002, SP2 from CD, it stops because it can't find any HD. In fact, when I boot up, messages say Drive 0 not found, drive 1 not found, etc. yet it lists those drives below that statement. Do I need to upgrade my bios and/or change my controller? I don't want any RAID arrays or at least 0. Can I upgrade my bios without an OS installed? How do I fix this?
Responses (20)
Solutions (0)
Thanks John for your quick reply. I disabled the SATA drives in the boot sequence and now the boot up looks normal, at least it looks just like my other SCSI Dell 530 does when it boots.
I had planned to upgrade all my drivers and anything Dell suggested (In order of course) after loading my OS especially my bios through the Dell website. I've done that before with my other Dells.
But I still have the problem trying to load my OS because the install packet (XP Professional, SP2) still can't detect my hard drives. At this point, are you saying that I must load the upgrade for the SCSI drivers now instead of doing it all at once with the other drivers later after I establish my OS? Or is this still another problem?Supposedly the latest bios offers help with hard disks, but I don't know how to flash the bios without an operating system to help.
Gratefully,
Ray BramletteDELL-John C
7 Practitioner
•
353 Posts
983
0
Posted October 17th, 2012 01:00
Hi Ray,
Glad to hear that the SATA drive error messages have stopped. Thanks for letting us know!
The problem with the SCSI hard drives not being detected when installing the OS is because the install media does not have any drivers available for the SCSI controller and as such, it cannot communicate with any SCSI devices. This is why you need to install the SCSI controller drivers by floppy disc when prompted by the operating system installation.
After the SCSI drivers are installed, the OS installation will be able to communicate with the SCSI hard drives and the installation should then proceed without further problems.
Hi John,
I'm trying to load an operating system again, but this time it's Windows 7 and I have the same problem with the install media not detecting the hard drives. Except this time I can't find any SCSI drivers for windows 7 at the Dell site. Can you help?
Ray B
Hi John,
After more thought, I’ve researched the forum conversations and it seems that there is no clean SCSI updates for the Adaptec controller (AIC-7901) onboard the Dell 670 if I wish to load Windows 7, 64-bit. For my wife I bought a 670 which had Windows 7 loaded and is running fine, but is running SATA drives. I probably should have bought the same for me, but I had these 3 relatively new, fast SCSI Cheetah drives I had been using in my Dell 530 which I was loathe to part with.
Anyway, I’m thinking I should buy an Adaptec 39160 PCI-X card as my primary SCSI card which I can get drivers from Adaptec for Windows 7. I’m not sure it will work in the 670 and I would have to disengage the on board controller. Does that sound okay? Can you help me answer any of those questions?
Ray B
DELL-John C
7 Practitioner
•
353 Posts
983
0
Posted October 29th, 2012 04:00
Hi Ray,
I've double-checked the drivers for the Precision 670 SCSI controller and I can confirm that we don't have any compatible with Windows 7. As for your plan, there's nothing wrong with that in theory - it's easy enough to disable the SCSI controller in the System Setup. The main problem is that I cannot confirm if the Adaptec 39160 PCI-X card will work with this system.
I've checked the Adaptec site for a compatibility report but unfortunately, the only one that I can see that mentions the Precision 670 is this one for the Adaptec SCSI Card 29320LPE - this card appears to be compatible with Windows 7: download.adaptec.com/.../scsicompatibilityreport_053107_29320lpe.pdf
If you already have an Adaptec 39160 PCI-X card available then there's nothing to stop you from trying this but other than that, I can't advise you if this will work without issues.
Thanks John,
I've been e-mailing someone from Adaptec and they say the same as you do, that the 29320LPE is the card I need because it is a host adapter and not a RAID controller. I understand they want to sell their product, but this is over $200 and that's more than I just paid for the 670. There's got to be a previous generation card that's more in line with the age of the 670 but still compatible with windows 7.... and of course more affordable as it would be a second-hand purchase.
Oh well, I'll keep digging and I'll let you know what I discover or finally do, but right now I just want to thank you for the sharing of your knowledge.
Ray Bramlette
Crescent City, CA
John, I just got a response from Adaptec when I asked for the previous card in that line and they said the only other currently shipping SCSI host bus adapter is the 29320ALP-R, which has a PCI-X interface. That sounds perfect because that is way more affordable than anything else so far. What do you think?
Ray
DELL-John C
7 Practitioner
•
353 Posts
983
0
Posted November 1st, 2012 03:00
Hi Ray,
You're more than welcome - just glad you're finding the information helpful.
The main stumbling block is that you're looking to install Windows 7. Getting hold of a SCSI controller that works with Windows 7 that doesn't cost a lot more than the SCSI cards that were out when this system shipped will be difficult, if not impossible. SCSI is an old standard now and there's not going to be as many Windows 7 compatible cards available which will push the price up.
Personally, due to the age of the system - it's been about 7 years since the Precision 670 first shipped, I believe - you might struggle getting Windows 7 working with SCSI.
As for the Adaptec 29320ALP-R, that's not going to work unfortunately. It's a low-profile PCI-X card and this system will only take full height PCI-X cards. If you tried to fit the card, it would be misaligned in the slot. If there's a full height variant of that card, it might be worthwhile trying that but I would double-check if they would accept returns if it did not work.
John,
Darn..... so after a little soul searching I've accepted what you've told me and abandoned the build of my last SCSI machine. I'm looking at installing a Western Digital 1TB Sata III hard drive instead and running Windows 7 at 64bits. See any problems before I start?
Sincerely, Ray

DELL-John C
7 Practitioner
•
353 Posts
983
0
Posted October 15th, 2012 02:00
Hi there,
If you only have SCSI hard drives in the system, this will explain why you see the "Drive 0 not found" and "Drive 1 not found" error messages. The BIOS is trying to find SATA devices at that point and cannot see any. To stop this from happening, press F2 at the Dell Splash Screen to enter the System Setup. Here, highlight Boot Sequence and if you see any mention of SATA hard drives, please disable these from the boot sequence.
If that does not work, go to the Drives section and highlight Drives 0 to 5 - if there is a drive attached to these, you will see the drive details listed on the right. If there are no drives attached to a particular port, then the port can be safely disabled.
More information on the BIOS options can be found here:
In order to install an operating system to your SCSI hard drives, you will need to have the SCSI controller drivers available on a floppy drive. The drivers that you require are here: www.dell.com/.../precision-670 - run the downloaded file and copy these to a floppy disc (if you have one available)
When installing the SCSI drivers, look out for this section of the installation: pcsupport.about.com/.../instxpclean1_3.htm - you will need to press F6 when prompted and follow all on screen instructions.
Hope that helps!