UNSOLVED

dd43

updated

21 years ago

D

dd43

9 Posts

0

9341

February 15th, 2006 19:00

19" Ultra Sharp Monitor

  I shut down my xps 400 and the monitor 19" digital ultra sharp goes on standby (yellow  )  but the screen is still lit.  Its been doing that the last week.  And then it will shut down totally other times.   I now shut the electricity off completely.  I haven't called about it thought I'd try here first. 
 
Someone said take it off stand by but how??  I'm not sure but I think when I have also shut it down completely by the button it still was lit but not when I shut down my surge protector strip.  Hope all this makes sense.
 
 
  • dd43

    9 Posts

    183

    0

    Posted February 15th, 2006 22:00

    I guess I'll have to call myself.  I do know that should not happen even when you completely shut the monitor off but to have to cut the electricity to the monitor is something else.   Thanks.
  • Mark0905

    2 Posts

    183

    0

    Posted February 15th, 2006 22:00

    I purchased the same system and monitor - 19" digital flat panel. I have had this problem since I purchased (nearly 2 months now).
     
    I looked for help in a Dell chat room, and was told to call Dell. I called them 2 or 3 times now and they all had me go thru some different steps to try and solve the problem. I explained that my monitor stayed on (at least 8 hours) until I started the computer back up or unplugged the monitor.
     
    This only seems to happen after the monitor is warmed up, usually 45 minutes or longer.
     
    I have ran out of patience and not sure where to go from here. I guess I'll make another call and see what this next tech has to say.
  • Mark0905

    2 Posts

    183

    0

    Posted February 15th, 2006 22:00

    The first time I called:

    > I was told to reset to the factory settings using the monitors menu. Then unplug the monitor cable, then the power and also the power from the computer. Didn't help.

    Second time:

    > I shut down and unplugged everything. Then i held down the power button on computer for 10 seconds. Restarted. Didn't help.

    I was told this was due to static. Holding the power button down was supposed to eliminate this.

  • VCraig

    2 Intern

    •

    2106 Posts

    183

    0

    Posted February 20th, 2006 03:00

    You asked: Someone said take it off stand by but how??  

    Right-click on an open area of the Desktop, then click on Properties, then the Screen Saver tab, then click on the button, then under Power Schemes for Home or Home Office | Turn Off Monitor, select "Never" (and "Never" for the HD and System Standby as you prefer).

  • dd43

    9 Posts

    183

    0

    Posted February 20th, 2006 09:00

    Thank you I'll will try that today and see wht happens.  I had called Dell also and they just said it happens.  But I assume they do log in what I called about but we'll see won't we.

    Rose

     

  • VCraig

    2 Intern

    •

    2106 Posts

    183

    0

    Posted February 20th, 2006 16:00

    I'm so used to accessing the various options the way I told you that I forgot to there is another way to get to the Power Options:

    Go to Start | Settings | Control Panel and click the Power Options icon.

    Message Edited by VCraig on 02-20-2006 01:04 PM