
UNSOLVED
Latitude 3190 SSD and Cloning
BACKGROUND
Dell gave me Latitude 3190 as a replacement for an old Dell Tablet that went bad because they no longer made that tablet. It is running Windows 10 Pro, x64. Have had it for several years now and has worked well as I only use it when traveling.
It shipped supposedly with only a 64GB eMMC drive but manual showed it also has one M.2 slot. Upon opening the computer I found there was already a M.2 2280 64 GB SSD installed. I was confused so contacted Dell. They basically said on some models (ex. Inspiron 3452) they have an eMMC that is mounted on a card and inserted in a slot. So that is what they suspected this is as the actual order for this Latitude 3190 “does not” show it shipped with a M.2 2280 SSD. It only shows it shipped with 64 GB of eMMC.
Because of the small Drive, I only installed a few things on it like Microsoft Office, my Virus software and a small program from Canon for my camera. I keep no files on it at all. No photos, documents, videos, etc. Everything is stored on a large USB Flash Drive.
Always had at least 9-10 GB of free space.
NOW
After many Windows and Dell updates that 64 GB now only shows 4.25 GB free and is in the Red when you view it so decided I would put in a larger M.2 SSD. The max on this Latitude 3190 is 256 GB according to the documentation which is fine. Dell told me which one to buy. What was strange again, was the one they told me to buy and they show under parts for this laptop is an M.2 2230 (the shorter drive). They said there should be a second mounting hole under the current M.2 2280 drive for the M.2 2230. I said fine.
So I bought the M.2 2230, 256 GB Drive they recommended. Bought an extender incase there is not another screw hole under the existing longer 2280 card and bought a USB to M.2 adapter so I could clone it.
My questions
. Should I be able to just clone the current M.2 2280 64 GB drive over to the new M.2 2230 256 GB drive then pull out the old and put in the new and will be good to go?
I was also originally planning to use the SupportAssist OS Recovery from the F12 boot to clone it. I checked it several months ago and it was an option in the menu and went through the procedure. See pic. However, I looked yesterday before starting this project and that option is now gone. See pic.
Don’t know why it is gone considering when I ran Support Assist yesterday it actually updated the SupportAssist OS Recovery to a new version? See Pic. Confused as to why it is gone now when using F12 to boot in BIOS.
Anyway, what good cloning software should I try to use since the SupportAssist OS Recovery seems to be gone now so cannot run it manually?

Responses (0)
Solutions (0)
