Dell E5470 is not recognising Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280) - How
to install
Hi Guy,
I am very new to this forum and my greetings to all.
I am trying to upgrade my Dell Latitude E5470 where I believe it comes with 250 gb m2 2280 SSD. I purchased Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280) to upgrade my laptop. I fist tested the ssd with nvme external enclosure and my other laptop recognised as unformatted and ssd blue ssd was working. I did not format the ssd and fitted to my dell e5470 laptop, The bracket looks M2 and fits well with no issue but BIOS is not recognising.
The current ssd in the laptop is B+M key ssd.
I tookout the Samsung ssd and again tried with my external enclosure but this time my other laptop did not recognised and no ssd blue lite. I tried several times with restart but no chance. Does this means the 'Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)' has gone bad?
How can I install Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280). The crucial software suggest '
Crucial P5 1TB PCIe M.2 2280SS SSD', which I believe is similar PCIe type ssd to Samsung 970 evo. Also I ran software from Mr Memory and they are also suggesting ''Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)'.
So my experience is fitting the 'Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)' in Dell latitude E5470 corrupts the ssd then how and which fastest 1 TB m2 SSD is compatible fo Dell Latitude E5470.
Is Samsung 860 EVO 1 TB SATA M.2 (2280) compatible with Dell E5470 and is it fast enough in comparison to Samsung 970 EVO?
So the query are
1) Is my ''Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)' gone bad?
2) Is Samsung 860 EVO 1 TB SATA M.2 (2280) Compatible with Dell E5470 as I believe this is mSATA
3) The M2 ssd slot is 'M' type and Crucial, Mr Memory and one of the Dell forum says that it can accept PCIe and mSATA, then why ''Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)" gone bad and not recognised by BIOS? I checked my BIOS and it is already upto date
4) Will Samsung 860 EVO 1 TB SATA M.2 (2280) be very slow in comparison with ''Samsung 970 EVO 1 TB PCIe NVMe M.2 (2280)" because of NVMe technology ?
the previous B+M SSD is likely a SATA M2 SSD. That suggest the B+M keying. There are no B+M keyed NVMe SSD on the market today, all B+M key SSD you can buy should be actually SATA.
Now you trying to put an NVM M keyed SSD into the same slot, however even if this a M keyed slot and SATA worked there, a NVM SSD will use different connection pins in the slot. It will use PCIe interface.
You should check in your BIOS if it has some options to enable a NVM pcie SSD. Usually under "drives" section
I think this question requires an attention of some Dell technician for sure, a lot of unknown variables that only could be responded by the manufacturer.
However, in regards to some basic things you asked:
2) According to the E5470 Owner's Manual, both NVMe and SATA disks are supported. Dell calls NVMe disks as "PCIe SSD". However, I am not sure what "Optional" exactly means when they describe them in the manual. Is it "optional" as in "Up to the user which type to use" or as in "It's an option you select during the purchase which type of disks this laptop will support; can be only one". Dell have tighten their budget for writing manuals on newer models, thus they have a lot of unclear information, unlike the older models.
4) Yes. An average SATA disk max speed is ~500MB/s (even if it's M.2). An NVMe (PCIe) M.2 disk max speed is ~3000MB/s. The difference is considerable.
I can't give a direct answer to the points 1) an 3), but first of all try other ways of testing your disk, maybe put the enclosure into a different computer. The question 3) will be confirmed if someone from Dell gives some insight on what I wrote above on the point 2). As I said, the manual is unclear and the "Optional" word could mean anything.
Hello, maybe already resolved issue, but for others: Latitide e5470 supports NVMe discs, BUT this model has limited storage up to 512 GB (SSD M.2 SATA / PCIe )
jkaffka
1 Rookie
•
13 Posts
4861
0
Posted October 2nd, 2020 16:00
the previous B+M SSD is likely a SATA M2 SSD. That suggest the B+M keying. There are no B+M keyed NVMe SSD on the market today, all B+M key SSD you can buy should be actually SATA.
Now you trying to put an NVM M keyed SSD into the same slot, however even if this a M keyed slot and SATA worked there, a NVM SSD will use different connection pins in the slot. It will use PCIe interface.
You should check in your BIOS if it has some options to enable a NVM pcie SSD. Usually under "drives" section