UNSOLVED

justindd

updated

6 years ago

J

justindd

8 Posts

0

1970

December 26th, 2020 16:00

Inspiron 15 7506 2-in-1, WD19TB, RocketStor 6661A

So I recognize that Thunderbolt 4 is pretty new, but that is what I have on my new Inspiron 15 7506 2-in-1 machine.  

Curious if anyone else has any ideas here. I have a RocketStor 6661A Thunderbolt 3 to PCIe 3.0 x16 Expansion Chassis that is TB3 connected through a Dell WD19TB dock. Inside the enclosure sits an LSI 9200-16E SAS controller that I use to connect to tape drives.

I want to start by saying this setup works perfectly fine with a Dell Precision 3510, Precision 3520, or an XPS 13 so long as I turn the computer on with the dock attached (understandable since the SAS controller has a ROM that needs to load).

On this new machine, things seem to work correctly if I startup the machine with the HighPoint enclosure connected directly to the PC going around the dock. Moreover, it seems to actually stay working if (without rebooting) I move the enclosure back to the dock and plug the dock back into the PC.

I have the latest available drivers, BIOS, etc. as of 12/26/2020.  Since I can make it work through a weird set of steps, I can't say this is a 100% showstopper but I would really like to see this fixed.

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    982

    0

    Posted December 27th, 2020 09:00

    Thank you! We have received the required details. We will work towards a resolution. In the meantime, you may also receive assistance or suggestions from the community members.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    1275

    0

    Posted December 30th, 2020 20:00

    Hi, could you please DM us so we may look into this for you?


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • justindd

    8 Posts

    1287

    0

    Posted December 30th, 2020 20:00

    So I have a new Inspiron 15 7506 2-in-1 which has Thunderbolt 4.

    There seem to be some bugs with the firmware and drivers right now.  Thunderbolt networking doesn't seem to work with a TB cable directly between PCs (in my case I tried with a Dell Precision 3510 and an XPS 13 9360, both with working TB networking between them using the same cable).

    I also find that when using the WD19TB Dock between the new 7506 and my HighPoint 6661A enclosure I use for my SAS controller, the controller cannot be seen/booted correctly, but it works fine on both my Precision 3510 and my XPS 13 9360.

    How long can we expect before Thunderbolt 4 from Dell can do what Thunderbolt 3 did 4 years ago?

    Because the Dell first level support can't seem to escalate to what is no doubt 4th level support without a service tag, .

  • justindd

    8 Posts

    1278

    0

    Posted December 30th, 2020 20:00

    Another bit of news, the Thunderbolt Control Application actually reports that this laptop has Thunderbolt 3 not Thunderbolt 4 in it.....

     

    justindd_0-1609390420500.png

     

  • justindd

    8 Posts

    1281

    0

    Posted December 30th, 2020 20:00

    Adding to my original post, both the XPS 13 9360 and the Precision 3510 can see the 7506 2-in-1 in their list of connected devices when connected directly with a TB 3 cable.   The 7506 thinks it is trying to connect to a dock, the Dell Power Manager tells me to go get Dell Command Update (Replaced by Dell Update) and get new firmware for the system and/or the dock.  Since I'm not using a dock, that isn't exactly possible.

    Interestingly, the symptoms are the same with or without the injection of a dock or thunderbolt daisy chain in between computers.  In fact, I can plug the either PC into the primary port of the dock with the other PC on the opposite end, and the same behavior, the other machine can see the new 7506 but the 7506 doesn't see anything at all (except the dock itself in one direction).  This happens with both a TB16 dock and a WD19TB dock.

    So basically, since one of my main reasons for buying a machine like this was to have full and working Thunderbolt, which this doesn't seem to have, the clock  is ticking before I will be returning this machine as 'defective' under the 30 day return policy.

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    888

    0

    Posted January 2nd, 2021 08:00

    Hello

    Awaiting a response to our previous message. Please DM us once you've available to take this conversation further. We're here to help. 


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    869

    0

    Posted January 3rd, 2021 08:00

    We cannot account for that TB3 listing above? Was it Dell software that showed you TB3?

     

    The online Setup and Specifications PDF states =

    Capture.JPGCapture1.JPG

    The sales site states =

    Capture2.JPG


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • leebeeb

    4 Posts

    998

    0

    Posted January 6th, 2021 04:00

    Have you had any other issues with this, I have the same set up, but I'm finding it has issues, where is does not always detect the monitors attached or sets them to the wrong resolution, with no option to change it. Plus if the monitors go to sleep, windows errors and need restarting. This morning when trying to get connected it took me about 4 restarts until everything was connected.

  • Walking18

    2 Posts

    961

    0

    Posted February 22nd, 2021 07:00

    I am experiencing the same issues where sometimes it sees the monitors (2) and sometimes it does not or it will switch the monitors sometimes as well. I also have issues where it does not see the USB devices attached like the USB speakers or printer. I can connect the USB devices directly to the laptop and everything works fine. I have done all the bios updates on the docking station. Any suggestions?

  • Walking18

    2 Posts

    700

    0

    Posted February 22nd, 2021 07:00

    I am experiencing the same issues as justindd where things are just not working right with the Dell docking station.  My prior laptop worked fine with the same docking station but my new Inspiron 15 7506 does not. How do we get more detailed support.