UNSOLVED

ErMellino

updated

7 years ago

E

ErMellino

3 Posts

4

2188

January 31st, 2020 01:00

Dell G5 5590 wrong thermal reading -> fan noise

Hello everyone, I have already opened a topic about that problem and I recived a support but it didn't work too much.

My specs are:

CPU: i7-8750H

GPU0: Intel UHD Graphics 630

GPU1: nVidia RTX2060

memory: 8Gb

When I open some programs like autocad that use the GPU1 the fans start to oscillate and get to maximum speed every 2 minutes and for about 10 seconds.

So I tried to understand what temperature reading makes this problem using the software HWiNFO and i found out something strange. Despite the CPU package has normal temperatures (about 40 degrees in idle) the embedded controller's temp5 (of the 6th core) has a strange behaviour with temps that goes from 0° to 180° in about 10 seconds. This is what make fans spin too much. Compairing tha graph of temp5 with GPU temp I noticed that this strange behaviour happends when GPU hasn't any reading (the GPU's graph shows 0° probably because it goes in sleep mode). If I plug the charger  the GPU come back to read the real temperature and the embedded controller' temp5 come back to read stable temperatures too.

This thing keeps going even if I close all the programs and all correlated processes in the task manager.

I found out that the only solution for that is to disable the RTX2060 from device manager and re-enable it, like to do a restart but without shutting down the pc.

I think it's a software problem because temperatures can be read well but only under the right conditions. I don't really know how to put hands. I hoped that updating the firmware could fix the problem but nothing changed. However all the drivers are updated.

  • zax1234

    1 Message

    1538

    0

    Posted April 20th, 2020 14:00

    I have the same problem, similar spec, but 16GB. Anyone can provide the solution?

  • olugenu

    1 Message

    1433

    0

    Posted May 11th, 2020 13:00

    I have the similar problem with i7-9750. Fans start to blow up every 50 seconds, even there is no significant increase in core temperature. This is annoying if you are trying to work in a silent room. 

    Because of this problem I have to turn off the turboboost. Disabled turboboost keeps the fan level at max %60 it become less annoying.

     

    I hope Dell solves this problem soon.

     

    Untitled.png

  • fra.carol

    2 Intern

    •

    60 Posts

    1114

    1

    Posted September 7th, 2020 01:00

    I have this problem too, maybe this is the 4th thread in which i'm writing about it.

    Here's the readings from HWinfo during the fan oscillation.

    https://drive.google.com/file/d/1T1QJsMcwZ-Vz8ZL1MSKTl2eKdz7Q_ELq/view?usp=sharing

    Even when I'm running a manual fan profile in AWCC, this fan oscillation will randomly take over

     

    If we all press the "me too" button on the threads relative to this issue, maybe dell will take it into consideration

  • fra.carol

    2 Intern

    •

    60 Posts

    1098

    1

    Posted September 7th, 2020 11:00

    EDIT to my previous post

    As it can be noted from the hwinfo readings i took (google drive link), the Temp5 reading goes from 0 to 180°C up and down, making the fan ramp up and down even if a custom curve is set, if it's not a fixed fan speed. the issue is clearly the wrong temp reading, since it goes below ambient temperature and it's not physically possible.