UNSOLVED

mwake

updated

6 years ago

M

mwake

10 Posts

0

5062

February 28th, 2019 16:00

5575 Inspiron and M.2 Nvme drives - anyone with experience?

So I want to upgrade and get an M.2 Nvme drive for my 5575. However, I'm glad I did a bit of research because it seems there are tons of issues with certain models brands even name ones with Samsung models.
 
Below is a list of drives I am considering to buy can anybody let me know if there are any issues or problems setting up these drives with their system? Many thanks
 
NVMe TOSHIBA 256GB Kbg30zms256g
Adata XPG SX6000 NVMe PCIe M.2 256GB
Samsung 970 Evo NVMe PCIe M.2 250GB
WD Black NVMe PCIe M.2 256GB (2017)
  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4379

    0

    Posted February 28th, 2019 17:00

    I have a 5575 and installed both an M.2 NVME/PCIe SSD and a 2.5" SSD. The M.2 is an Adata SX8000NP (256 GB). And the 2.5" is a Samsung 860 EVO (500 GB). They both work like a charm and make a world of difference in the performance of the 5575 over the HDD that originally came with the system. I did not clone the drives but clean installed Windows 10 to get the best performance without any bloatware. The Samsung was purchased for the system but the Adata was a drive I had sitting around after putting a larger capacity drive in my desktop.

    The only quirky thing, and I have no idea why and have not had a good answer in the forums, is that the M.2 drive is not detected in the BIOS but boots fine, installed Windows 10 without a problem, and gives great performance as noted previously.

    I would not go with the Adata 6000 as the SX8000NP performance is far better. There have also been posts in the forum about users with problems having installed the 970EVO. I believe there was a problem with the drive's firmware and the last Windows 10 update (1809). Possibly another user has more info on that and can post.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • 4355

    0

    Posted March 1st, 2019 10:00

    I have a Dell 15 5570 and just put a HP Ex900 M.2 500 Gb Nvme and it works fine. I am only getting 1.5 Gb per second but that seems the norm for this line of dell 15 5000 series.  

  • mwake

    10 Posts

    4348

    0

    Posted March 1st, 2019 10:00

    Thanks for your reply, that was the reason for my question that many NVMe are compatible with this laptop but when doing research I see a lot of comments relating to usage issues.  I just wanted to ask some users before committing to buy.  I will definitely look into that product recommendation. 

     

    By the way, if the bios don't recognize the drive does windows setup recognize the drive when installing? 

  • rporro

    3 Posts

    4276

    0

    Posted March 26th, 2019 04:00

    It's there any bios setting I need to enable to have the M.2 Drive to work? I installed one WD blue label 500GB on mine and it does not recognize it. neither BIOS or windows or linux, please advise, I know the drives works because I tested it on a 5570 that I had before, then on a G3 and it worked like charm, but on my new 5575 it doesn't.

  • Billdag

    8 Posts

    3158

    0

    Posted January 7th, 2020 11:00

    I have the 5575 AMD 2500U version and struggled with an update to M.2 WD 500GB Black for many months before I gave up. The recurring problems included blue screen of death every few weeks, the PCIe dropping to single lane (from 4) on reboots so I was only getting under 1GB/sec R&W. Like most people, I was frustrated initially with the snail's pace of the included 5400 RPM drive. Anyway, I ended up cloning the M.2 to a 500GB 2-1/2" SATA SSD several weeks ago. The computer has been rock solid since and I'll live with the fact that I'm limited to about 500MB/sec. With the improvement in IOPS, the computer is running fine. Don't know for sure if the problem is with my choice of NVME drive but suspect that the problem is in the implementation by Dell. The weird thing is that I was getting the full 4 lanes when installed and getting up to 3.5GB/sec but that only lasted till the next boot up. Whenever I updated the BIOS or made other changes in CMOS I would get my 4 lanes and speed back - but.........only till the next reboot. I could have lived with that but the blue screen every couple of weeks bothered me. Fingers crossed!

  • mwake

    10 Posts

    3016

    0

    Posted February 13th, 2020 17:00

    Hi, did the NVME drive not show up in windows disk management? Sometimes drives dont show up in windows explorer initially but windows sees them in Disk Management and then all that is requied is a format in DM to get it to show in File Explorer.

  • jimep

    1 Message

    1973

    0

    Posted October 5th, 2020 06:00

    Hi, I was considering on buying a wd blue 500gb m2 and you said that the computer didn't recongnize it, was it solved? or should I consider buying another brand? I own a 5575 series.