multipathing between 1Gb and 10Gb EQL storage mixed with 1Gb and 10Gb servers
Hi,
i have a setup with 7 EQL's (6500 and 6100) all connected on 1Gbit interfaces, and about 8 servers all connected with several 1GB interfaces to the storage network.
Currently they all use multipathing when connecting to the storage.
We are going to expand with a set of 6610 and 6210. And new switches 10GbitBaseT. connection. Also 2 new servers that will have 10Gbit links into the storage network. These storage boxes need to be added to the existing group.
How is multipathing going to work into the old boxes when there is probably only 1 networklink(10GB) (or maybe 2) into the storage network from the new servers. The won't have multiple initiator IP's?
Offcourse all storage arrays will be fully cabled. just not all servers might be.
We need the new equipment to be in the new group, otherwise all the features such as tiering and movement/migration of lun's and phasing out old equipment won't work.
We can give every server 10Gbit and 1Gbit interfaces if that is needed for the mixed environment. It will take a considerable amount of time to get rid of the old storage arrays since some of them are only about a year old.
So we need a good 'workaround' for a mixed setup :)
I understand a full solution would be hard via the forum. I called the local Dell AM again and now at least i received a PDF from dell with Best Practices for deploying in a mixed environment. I will read up on that first. What it looks like i have about every part covered that is suggested in this document :)
So i guess i am halfway there.
There will however be much more newer servers with 10GbE that will connect into the old arrays. than the speed of upgrading arrays. The old arrays still have to survive another 2 years at least so i'm gonna need to work around that somehow.
Offcourse we are going to try to locate as many LUN's that are accessed from 10GbE servers as possible, but due the number of arrays already in place that won't be completely possible.
avoiding the mix as much is possible is clear! we will do that offcourse, but in the beginning can't do that for the complete setup.
we do use the HIT/ME Sotware so we can do something there, and i can populate the newer servers with 1GbE interfaces as well, so we could separate and deny 10GbE initiator connections into the old arrays completely.
MoRRiS11
1 Rookie
•
47 Posts
1702
0
Posted January 7th, 2016 05:00
Hi Don, tnx for the answer so far.
Offcourse all storage arrays will be fully cabled. just not all servers might be.
We need the new equipment to be in the new group, otherwise all the features such as tiering and movement/migration of lun's and phasing out old equipment won't work.
We can give every server 10Gbit and 1Gbit interfaces if that is needed for the mixed environment. It will take a considerable amount of time to get rid of the old storage arrays since some of them are only about a year old.
So we need a good 'workaround' for a mixed setup :)