UNSOLVED

jamieralphsmith

updated

16 years ago

0

5249

March 25th, 2011 07:00

OSD via USB

I have created an offline task sequence to deploy XP via SCCM and have put it on a USB flash drive (made from the SCCM Admin Console). Everything works fine until I image a Laptop (either a E6410 or an E4310) but afterwards if I try to use my flash drive to boot a Desktop system (tried on a 755 and a 780), however it will still boot the laptops. I don't even know where to begin to look since my TS runs fine with no errors. Anyone have any ideas?
  • DELL-Warren B

    1 Rookie

    •

    1124 Posts

    502

    0

    Posted March 27th, 2011 22:00

    I've seen some issues with using Offline Media with desktops. I don't recall if it was a boot order issue, or just something odd with the desktops. I would test with a DVD first to make sure that the issue is limited to the USB key.
  • Lee_Umney

    1 Message

    502

    0

    Posted April 13th, 2011 01:00

    When you try to use the USB stick on the desktops does it load Windows PE or does it just load into Windows? If it does boot into Windows PE does it deploy the image?
    If you supply more information I'm sure we can resolve this quickly.
  • 502

    0

    Posted April 21st, 2011 08:00

    doesn't even load into PE, I get No Operating System Detected.
  • 502

    0

    Posted April 29th, 2011 13:00

    "I've seen some issues with using Offline Media with desktops. I don't recall if it was a boot order issue, or just something odd with the desktops. I would test with a DVD first to make sure that the issue is limited to the USB key."
    After some testing with a DVD it looks like the issue is USB related. I tried different model keys and such with no results.
  • DELL-Warren B

    1 Rookie

    •

    1124 Posts

    502

    0

    Posted April 29th, 2011 14:00

    Great! Good to hear that the DVD is working for you. We're using the DVD exclusively to avoid the issue with USB keys and offline media.