I understand the WD15 outputs 60w to non dell devices and a higher wattage to dell devices assuming a 180w power brick is present. In my case I have a dell 5424 laptop but cannot get it to resolve 90w like the laptop is capable of over usb c, only 60w. I know its possible because the WD19TB was able to do it, but I cannot get it to work on the WD15. Anyone have any ideas? I tried updating the firmware to 1.0.4 but the tool claimed the dock was already updated to that.
The thunderbolt version can negotiate with the system to settle on a power agreement. The non-Thunderbolt version cannot.
There's a reason why the Thunderbolt version is more expensive (beyond the added cost of the Thunderbolt chip). The feature set is more extensive with Thunderbolt than it is with just USB-C, and the engineering standards are tighter and higher.
The newer WD19TB docks sell for under $100 at this point (used). That's a fraction of what they sold for new and less than the WD15 non-TB cost when it was new. If you need the added power delivery, you need a Thunderbolt dock.
The dell 5424 does not support Thunderbolt although a dock like the TB16 will charge it at 60w (since that requires just standard PD) but, it will not send any data and therefore cannot negotiate any higher wattage. Maybe I am misunderstanding this, but I thought the WD15 contains no thunderbolt capabilities, and the TB16 is the Thunderbolt equivalent, so why would they advertise "
Docking station
Power
WD15 and 130 watt AC adapter
90W
WD15 and 180 watt AC adapter
130W
" for the WD15 which is the non thunderbolt version if you are saying Thunderbolt is required to negotiate beyond 60w? I am not saying you are wrong, I am just confused here. If you need me to test anything, I have a Wd15, TB16, and a WD19TB in front of me.
The WD19TB supports non-Thunderbolt USB-C systems, which is how I was able to use it with my non-Thunderbolt Dell 5424. I agree that using a WD19TB would be the simplest workaround, but the one I tested is borrowed, so that would mean buying another dock.
My goal here is to understand why the WD15 isn’t negotiating a higher power level with this laptop, and whether there’s anything I can do to address that. I realize it’s an older dock, but I already own it and would like to determine whether this is a fixable issue or a compatibility limitation before replacing it.
Re: My goal here is to understand why the WD15 isn’t negotiating a higher power level with this laptop, and whether there’s anything I can do to address that.
There is no need to replace the docking station. Just simply use/connect the laptop's power adapter in the setup.
ejn63
12 Elder
•
31859 Posts
•
156307 Points
11
0
Posted October 27th, 2026 21:13
The WD15 has no Thunderbolt port - just USB-C.
Without the Thunderbolt chip, it cannot negotiate 90W or more power delivery.