
UNSOLVED
Trying to connect an EMC AX4 to a Brocade FCX648.
Greetings,
I have a M1000e Chassis with two m6220 (not stacked).
The AX4-5i is connected to ports g17 and g18 on each m6220.
From the blade I can see all 4 AX4 ip addresses and everything works fine.
Everything connected and working.
I need to connect that AX4 to the brocade FCX648.
When I connect the AX4 to the brocade I cannot reach it from the server.
I treid doing vlans for each m6220 but that didn't work.
I was hoping someone here could give me a tip.
Thank you very much for your time!
Ed
Responses (0)
Solutions (0)
