UNSOLVED

StevenYang

updated

18 years ago

S

StevenYang

23 Posts

0

53002

October 12th, 2008 20:00

How to operate the EMC PowerPath License Tool

Hi, all

Our server is PE 2950, the operation system is Windows Server 2008 Enterprise Edition, the disk array is AX150i. When I install the PowerPath at this server I see the following steps:

1. It let me select "Do you have only AX series CLARiiON arrays connected to this host?", we have the AX150i only now, but I am not sure if we'll add another disk array that is not the AX series later, so I select the "No" option, and next.

2. I select the "Typical Install"

3. There is the "EMC PowerPath Licensing Tool" window pop up when the installation procedure. I click the "Cencel", then there is prompt "PowerPath will be unlicensed the next time this machine is rebooted. Is this what you want to do?", I click "No", and then the installation is successfully.

My questions: Where can I get the license key? The PowerPath can work normally if I don't enter the license key and we have AX150i only?

 

Thank you! 

  • tommo666

    4 Apprentice

    •

    1211 Posts

    1236

    0

    Posted October 13th, 2008 15:00

    Powerpath when used with an AX system is free, so you should click yes when asked if you only have AX.

     

    If you want to add a different Dell | EMC array ie a CX then you will buy powerpath licenses for the number of gosts you want to attach to it and enter them during the install. 

  • Dell-Jeff G

    156 Posts

    1236

    0

    Posted October 15th, 2008 12:00

    Tommo666 is correct, PowerPath for AX-Series is free.  The only thing answering "No" does during the installation is prompts the user to enter a license key.  PowerPath will recognize if it is connected to an AX-Series or CX-Series and if there is no license key entered, it will provide unlicensed basic failover for the CX-Series while providing full failover and load balancing for AX-Series.