UNSOLVED

kevin79

updated

12 years ago

K

kevin79

1 Rookie

•

55 Posts

0

49524

June 18th, 2014 09:00

System Update - non-compliant systems but no updates needed

I am using OME 1.3 on a 2008R2 server. I have 4 Server 2012 R2 Standard servers that show up as Non-Compliant Systems. When I click on them though, there aren't any updates to apply and if I manually boot in to System Services it shows everything as being up to date. How do I get the servers out of Non-Compliant to Compliant?

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    1379

    0

    Posted June 18th, 2014 14:00

    Thanks for the question.

    Are you discovering these servers In-Band (like SNMP or WMI w/ OMSA)?  Or out-of-band (iDrac + WSMan)?

    Thanks,

    Rob

  • kevin79

    1 Rookie

    •

    55 Posts

    1379

    0

    Posted June 19th, 2014 05:00

    I am using WMI and also WSMan to discover the iDRACs.

  • TRScott

    140 Posts

    1379

    0

    Posted June 19th, 2014 10:00

    Try deleting them from the device tab, then rediscover them and see if they show up under the proper tab.

  • kevin79

    1 Rookie

    •

    55 Posts

    1379

    0

    Posted June 19th, 2014 11:00

    That didn't help. They came back to Non-Compliant.

  • DELL-Pupul M

    2 Intern

    •

    1004 Posts

    1379

    0

    Posted June 19th, 2014 11:00

    Which is the catalog that you are using? Is it FTP or local repository? Can you try reimporting the catalog from system updates page and see if that helps?

  • DELL-Pupul M

    2 Intern

    •

    1004 Posts

    1379

    0

    Posted June 19th, 2014 12:00

    I think it is time we suggest you to log a trouble ticket. It would be best if the support guys take a look at the db and check if something is causing the problem. You can log the trouble ticket at 800-945-3355.

  • kevin79

    1 Rookie

    •

    55 Posts

    1379

    0

    Posted June 19th, 2014 12:00

    It is using FTP and version NM0XF, released on 6/12/2014. Reimporting the catalog didn't help either.

  • bexstaz

    1 Message

    1379

    0

    Posted November 3rd, 2015 19:00

    Did you end up getting this resolved? What was the outcome \ solution? I am experiencing the exact same issue. 

  • kevin79

    1 Rookie

    •

    55 Posts

    1379

    0

    Posted November 4th, 2015 04:00

    It resolved itself. I didn't do anything to resolve it.