UNSOLVED

doof1

updated

19 years ago

D

doof1

45 Posts

0

991

October 25th, 2007 14:00

Interop with Brocade 4100 and Cisco MDS 9509

Hi

I have a fabric with 1 switch Brocade 4100 and 1 switch MDS 9509

brocade 4100 (5.3.0a)
domain ID 127
interop on

MDS9509 (SANOS 3.1.2(3a)
domain ID 100
interop-1
bbcredit 16

each time, the brocade reboot,
1. it's the main
2. all fabric port are shut and after , no shut

how can i setup the fabric
. to MDS be the main ?
. zone doesnt be disturb when brocade are rebooted ?
  • 349

    0

    Posted October 30th, 2007 07:00

    Hello,

    Any interop configuration should be first checked with the EMC Support Matrix / Elab Navigator to ensure it is supported. Unfortunately I'm not sure exactly what the SAN-OS version you are using as you stated it is 3.1.2(3a). If your configuration is EMC supported, I would recommend using any of the noted configuration settings as noted in both the Support Matrix and the Topology Guide.

    If you are still having a problem, I'd recommend opening a case with support and provide a full set of logs from both switches.

    Thank you.
  • doof1

    45 Posts

    349

    0

    Posted November 9th, 2007 01:00

    Support ask me my problem is the priority switch option.

    We find the option on MDS but not on brocade.
  • 349

    0

    Posted November 13th, 2007 08:00

    Hello,

    It sounds like you currently have a case opened with EMC support. I'd recommend working with them to resolve your issue as it is not possible on these Forums.

    Thank you.
  • daver3

    46 Posts

    349

    0

    Posted August 12th, 2009 12:00

    I am trying to do the same thing with the same model siwthces and cannot get it to work either, getting a elpfailureinvalidflowctlparam on the mds 9509