UNSOLVED

bernd3

updated

17 years ago

B

bernd3

42 Posts

0

1749

March 19th, 2010 01:00

unable to register initiator record

Dear all,

I have problems registering a second hba with one host. Using the connectivity status tab the second hba doesn't show up (which is expected) so I tried to newly register it with "Create..."

But the Create Initiator dialog gives me the error message:

create_error.png

When checking the host in the storagegroup it suddenly shows up with two hba's, one of them unregistered:

storagegroup_status.png

The hba in question is shown as not registered / not logged in, which is perfectly right. But how can I register it?

To be on the safe side I already tried with navicli removehba:

C:\>naviseccli -h box31a port -removehba -hbauid 50:01:43:80:02:FE:1B:DF:50:01:43:80:02:FE:1B:DE
Error: port command failed
The HBA UID specified is not known by the array

Has anyone any idea how to register this hba (or how to get rid of the unregistered dead entry)?

regards,

bernd

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    570

    0

    Posted March 19th, 2010 03:00

    the dead HBA you should be able to de-register in Connectivity Status window, what happens when you try that ?

  • bernd3

    42 Posts

    570

    0

    Posted March 19th, 2010 04:00

    the dead hba doesn't show up in the connectivity status window :-(

    It only shows up in the storagegroup host connectivity windows, but from this view I can't delete it

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    570

    1

    Posted March 19th, 2010 05:00

    have you tried restarting management service on each SP ?

  • Allen Ward

    6 Operator

    •

    2124 Posts

    570

    1

    Posted March 19th, 2010 08:00

    If restarting doesn't work I would try removing the zone for the second initiator and then restarting the SPs again. Then see what happens when you put the zone back in again.

  • bernd3

    42 Posts

    570

    0

    Posted March 20th, 2010 23:00

    restarting the management server worked only partialy: the previously missing hba now shows up as registered, but the previously registered/connected hba is now missing...

    Have to wait till monday before trying allen's suggestion with removing the zoning; to make sure the serveradmin hasn't tried to use any luns on this server, yet

  • bernd3

    42 Posts

    570

    0

    Posted March 22nd, 2010 05:00

    Removing the zoning and restarting the management server worked

    After that I reenabled zoning and could register the hba normally.

    thanks for your help,

    bernd