UNSOLVED

gujjur

updated

18 years ago

G

gujjur

11 Posts

0

463

March 5th, 2009 10:00

number of I/O s supported on SP port

hi guys

i have a scenario of merging a large environment to the clariion which is already big . so i thought of going through some parameters like how many iops are supported on cx3-80 flare code 26 . number of hosts and number of drives are with in the limit . i am sure that OLTP ( online transaction processing ) for CX3-80 is around 72000 per minute ( for a 480*146GB disks with 8 4GB/s FC ports) . doest this answer my question .

thanks

ravigujju
  • DaveZ1

    75 Posts

    122

    0

    Posted March 18th, 2009 15:00

    While your CSPEED rep could tak to specific IOPS per port, you really don't have to stress about that in CLARiiON if you follow best practices -- which is easier now they renamed the CLARiiON Best PRactices doc, so you can actually find it on Powerlink - just search "CLARiiON Best Practices". The guidlines there - spreading load across available HW centers, max ports to zone to each host etc. will take care of the port problem. Your main concern with a random workload is enough drives to handle the load. 72K IOPS is a *lot* of IO. You can work through the sizing steps in the BPG or get a CSPEED rep to work it with the disk estimation tool. But be warned - on a 3-80, you'll probably be well over 50% SP utilization with this workload so planning for failover/NDU will be tough.