LarsB1

updated

13 years ago

L

LarsB1

43 Posts

0

2471

June 19th, 2013 01:00

Meta LUN information ( striped or concatinated) in SP Collect.


All

Is there any way to decide if a MetaLUN is striped or concatinated from looking in a SP Collect?

Thanks

LarsB

  • GearoidG

    251 Posts

    1676

    1

    Posted June 19th, 2013 04:00

    See the previous post I did about USM which should guide you

    https://community.emc.com/people/GearoidG/blog/2013/04/04/other-useful-features-of-usm

  • RRR

    6 Operator

    •

    5739 Posts

    1673

    0

    Posted June 19th, 2013 04:00

    that should be visible. At least in the GUI it is. Not sure how and where in an spcollect this shows up, but I can imagine it's there. I'll try to look it up when I get back to the office next week.

  • RRR

    6 Operator

    •

    5739 Posts

    1679

    0

    Posted June 19th, 2013 04:00

    Nice! I tried to help attract some more people to your article by writing a (very) little blog post.

  • GearoidG

    251 Posts

    1676

    1

    Posted June 19th, 2013 04:00

    There is files that do explain it - however for simplicity I would recommend having a look at the SPx_array_config.xml within the spcollects

    You can view this using Unisphere Service Manager

  • Steavson

    9 Posts

    1679

    0

    Posted June 19th, 2013 09:00

    MetaLun.JPG.jpg

    Each time when a Lun is concatenated, a new component will be created.  Concatenation and striping can be performed multiple times on a Lun. There is a limit for Luns per MetaLun component and Components per MetaLun. They differ from array model. Above screen shot is taken from SP collects. Using Layout column we can identify striped Luns on each component

  • GearoidG

    251 Posts

    1679

    1

    Posted June 20th, 2013 05:00

    Yup thats it exactly Lars

    Gearoid

  • LarsB1

    43 Posts

    1679

    0

    Posted June 20th, 2013 05:00

    Hi Steavson

    how did you create that uotput from a SP Collect?

    /LarsB

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    1679

    0

    Posted June 20th, 2013 05:00

    The Output is taken from TRiiAGE tool used by EMC Support to extract and analyze SP Collects.

  • LarsB1

    43 Posts

    1679

    0

    Posted June 20th, 2013 05:00

    Is it correctly understood,from the example below, that if the id fiels only contains one entry, it is a striped metalun, and that if the id field contains more entries, it is a concatenated Meta??

    thanks

    LarsB

    meta.jpg

  • etaljic81

    1000 Posts

    175

    0

    Posted June 20th, 2013 06:00

    Steavson,

    Just want to make sure I understand the output. In your example, all LUNs (with the exception of LUNs 0, 22 and 66) are concatenated metaLUNs. Is that correct?

    Thanks.