UNSOLVED

0ynUr6cR0C12242

updated

15 years ago

0

611

February 2nd, 2012 05:00

EMC CX3-10c Replacing a Fibre Card

We have an EMC CX3-10c SAN with our File and Database Cluster connected to the SAN. Each member of the cluster have 2 QLogic Fibre QLE2460 cards. One of the FC cards failed and has been replaced however PowerPath is still reporting the card as dead. How do I remove the dead card from PowerPath and get the new card to appear?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    131

    0

    Posted February 2nd, 2012 05:00

    on Unux/Linux

    powermt check

    powemt config

    powermt save

    on Windows

    powermt check reconfig

  • kelleg

    6 Operator

    •

    4537 Posts

    131

    0

    Posted February 2nd, 2012 10:00

    Don't forget to check in the Storage Group in the Host tree - right-click on the host nane and select Connectivity Status and make sure that the new HBA (new WWN) is connected to the Storage Group. If you see the paths in ~Management - just click the Reconnect button.

    glen