shafty1

updated

17 years ago

S

shafty1

14 Posts

0

1152

October 13th, 2009 02:00

Directing connecting a host to FC connectors on a NX4

Hi guys,

I'm wondering has anyone directly connected the NX4 to a FC switch using the 2 FC front-end connections on the intergrated SPs? I would like to use the fibre channel connectivity.

Thanks,

Paul.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    446

    0

    Posted October 13th, 2009 07:00

    server_devconfig server_2 -create -scsi -all
  • shafty1

    14 Posts

    446

    0

    Posted October 13th, 2009 04:00

    Hi guys,

    Do you know if you can delete the default storage pool "clarsas_archive" or assign it under navissphere express to a differnt host?
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    446

    0

    Posted October 13th, 2009 06:00

    ran nas_volume -list
    selected the disk and ran nas_volume -info "disk"
    confirmed that the disk was not in use
    deleted the virtual disk by running nas_disk -delete
    "diskX"


    that should have been "nas_disk -delete diskX -perm"
  • shafty1

    14 Posts

    446

    0

    Posted October 13th, 2009 06:00

    ok lads - got this working. I added the FC frontend ports to a FC switch and zoned in a host. Under the navissphere express gui I manual registered the host with the storage array.

    SSH into the control station

    ran nas_volume -list
    selected the disk and ran nas_volume -info "disk"
    confirmed that the disk was not in use
    deleted the virtual disk by running nas_disk -delete "diskX"
    under Navissphere GUI i removed the lun from the control station SG and added it too the host.
  • shafty1

    14 Posts

    446

    0

    Posted October 13th, 2009 06:00

    Cheers... trying this out on a test enviroment at the moment. If I dont use the -perm command does the system_config restore the disk configuration to factory default?


    Thanks
    Paul.
  • shafty1

    14 Posts

    446

    0

    Posted October 13th, 2009 07:00

    Whats the command for running a rescan?

    Thanks
    Paul.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    446

    0

    Posted October 13th, 2009 07:00

    here is a note from the man pages:

    Unless -perm is specified, the disk is still identified as a Celerra disk
    and can be discovered and marked again using server_devconfig.

    The -perm option removes the entry from the disk table and deletes the
    diskmark. The disk is then available to be deployed for use by another
    platform.

    not exactly sure if Celerra will be throwing errors every time you are trying to rescan, trying to look for that LUN.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    446

    0

    Posted January 18th, 2011 13:00

    what's been the issue Bill ?

  • 446

    0

    Posted January 18th, 2011 13:00

    I just want to VOTE UP this discussion.

    I'm a very dissatisfied NX4 customer. My sales agent at SoftChoice found this as an option for us. We only wanted a huge array with big disks and a fat pipe. We were looking at an AX4-5i but he found the NX4 to be ODDLY cheaper as it has an AX4-5F8 built in. It has been a nightmare. Some day, we may use this info and remove the power from the data mover and the control station and just use the Clariion with HBAs (yet to buy)

  • 143

    0

    Posted January 18th, 2011 14:00

    You're a beacon of light in the darkness!