Is Dell going to provide bios updates for all R10 boards that contain a fix for the various USB issues with Ryzen 3000 and 5000 series CPUs in 500- and 400-series motherboards (i.e., X570, X470, B550, and B450) and consist of random dropouts for USB-connected devices. The complaints encompassed several different types of USB devices, including unresponsive external capture devices, momentary keyboard connection drops, slow mouse responses, issues with VR headsets, external storage devices, and USB-connected CPU coolers.
Would also like to know. This issue renders my Reverb G2 useless and I'm sure there are thousands who have similar issues. MSI and Asus have rolled it out, so when will Dell?
Have to say I'm very disappointed with both the lack of any reply to this issue on this forum and the complete lack of knowledge Dell technical support have. A simple search on the Internet will reveal the widespread issue, yet still they think it is the fault of the device connecting and not Dell's.
I called AMD directly and they said they have released the update to individual manufacturers and it is upto them to distribute it with MSI and Asus doing so a few weeks ago.
When will Dell?
I am so frustrated and disappointed by Dell my ideal solution is I return the pc and go with another company. I have had it 2 months so I know I am fighting a losing battle to do this, but at the very least they should be able to provide competent support.
For sure Dell will not do it for the R10 3000 series, because it will give us the possibility to put a 5000 series processor, on a so called by Dell, incompatible motherboard. they will never update the AGESA on those.
I have suggested to Dell TS that we explore the possibility of forcing PCIE 3.0 but I do not believe that is possible, at least at user level. Other manufactures do allow this. If anyone has any suggestions they would be appreciated. Dell TS ignored my suggestion, instead asking if I had the cable of the device connected correctly and the on button switched on (there is no on button on it!).
My computer specs are:
Ryzen R10 5950x
RTX 3090
64gb RAM
AMD x570 motherboard
I bought this computer for a rather large amount of money for the purpose of VR and yet because of this issue I am unable to use my Reverb G2 headset. Actually not entirely true, I am able to use the headset connected to the top USB port (all others do not work) but after about 2 weeks it stops, coming up with the "requires a 3.0 superspeed port" message. This has happened on three Reverbs G2 now, thankfully I have been able to return all of them so far and get a replacement in the vain hope Dell will sort this issue out in time.
I think it matters to some extend, because it's not a mainstream chipset.
It's an OEM only chipset and technically speaking is a B450 chipset that is rebranded as B550A.
Because of this it's harder to get support for it, unlike the X570 chipset.
It's further complicated by the fact that there are 2 "versions" of the R10, with a different motherboard but same chipset.
It all makes it hard to get support for it.
I should add that if you have an R10 with a Ryzen 5000 CPU, there's an updated bios that was made available just a few days ago. It might contain an updated AGESA version.
I cannot verify it because I have the "other" R10, but I can confirm the AGESA version is still 1.0.0.6 on the Ryzen 3000 version.
There seems to be a lot of confusion about the motherboard and that the manual may be out of date or just wrong. I have a 0TYR0X which during an internet search comes up with an AMD x570. Not that it really matters for this discussion however, whichever it is it isn't functioning as it should be.
I downloaded the 2.1.3 (I think) bios update a couple of days ago, sadly didn't fix the issue. In the update notes it mentioned something about RAM speed but nothing about usb connecticity issues so I wasn't holding on to much hope when I tested the headset in all my usb ports.
Latest from Dell tech support is they are trying to put the blame on the fact my computer has USB 3.2 and 3.1 and the device I am connecting is 3.0 and therefore incompatible.
Surely 3.2 and 3.1 are backwards compatible?
It feels like Dell is trying to do everything they can to avoid any responsibility and push the blame onto the makers of my device HP.
Shrimpy_dikdik
11 Posts
1682
1
Posted May 19th, 2021 01:00
Would also like to know. This issue renders my Reverb G2 useless and I'm sure there are thousands who have similar issues. MSI and Asus have rolled it out, so when will Dell?