My system received the Windows 10 1809 update tonight. After the update, the TB 16 USB ports stopped working. It looks like the ASMedia USB Extended Host Controller has disappeared from the device manager.
I attempted to install, reinstall etc the various drivers. At times the USB devices would come back briefly, but not survive a restart. I would then attempted to reinstall the ASMedia drivers, and run any firmware updates.
I found that executing the latest Intel_TBT3-FW_UPDATE_NVM26_FJJK7_A08_4.26.11.001 firmware update would "force" the computer to recognize the ASMedia Controller and the USB devices connected would re-appear and the ASMedia Controller would re-appear in Device Manager. However, still upon a restart, they would disappear.
I finally just restored the computer to an earlier image and have deferred any updates for the time being.
Any chance you Citrix Receiver was installed recently? Older versions of that application can cause these kinds of issues. Dell has a KB article about the TB16 and Citrix Receiver. The fix is to update to a newer version of Receiver, which is a free download from Citrix.
Lol no, no Citrix installed here. That is the first result that usually comes up when searching for issues.
I was thinking this had something to do with new Windows update. Through my troubleshooting process, the laptop has the latest BIOS available, and the dock has the latest firmware now. After rolling back, everything works fine.
I had the same problem, and followed the instructions and reinstalled the ASmedia controller driver which solved it. Then a week later it happened again, and I found that the following easy fix worked great.
First open Thunderbolt by right clicking the icon in the sys tray (right hand end of the windows taskbar). Its the icon with the zig zag arrow.
If that icon is not there, then first try running Thunderbolt software from the start menu and then re check the sys tray.
Once you see it in the sys tray, right click it and
Now click on Manage Approved devices
Finally, click on the "computers" button and your USB should come back to life. Then just close the window.
jphughan
11 Legend
•
13985 Posts
•
79931 Points
1490
0
Posted January 13th, 2019 22:00
Any chance you Citrix Receiver was installed recently? Older versions of that application can cause these kinds of issues. Dell has a KB article about the TB16 and Citrix Receiver. The fix is to update to a newer version of Receiver, which is a free download from Citrix.