UNSOLVED

renwd

updated

1 year ago

R

renwd

1 Rookie

•

14 Posts

0

931

October 22nd, 2022 15:00

XPS 8950, trouble installing a PCIe x4 card

I want to install a PCIe x4 card but the card does not fit the slot and is shorter by about 1" where it should be flush with the rear of the PC. The ports end up recessed and not supported. What is the solution?

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    606

    0

    Posted October 22nd, 2022 21:00

    DO NOT install that card as it sounds like it is the wrong one.

    Some pictures might help. Take a picture of the card (laying on the desk) with a ruler below it.

    The PDF Service Manual for your computer is a support.dell.com  

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • renwd

    1 Rookie

    •

    14 Posts

    585

    0

    Posted October 24th, 2022 07:00

    The service manual is no help with this issue. All cards I looked at will not fit. The slots on the mother board are recessed from the rear of the computer. Others have expressed the same issue. Suggest a card that will fit. The cards I have looked at ALL are about 2 1/2" from the rear pins to the bracket. They need to be 3 1/2" from the rear pins to the bracket to fit the 8950. 

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    571

    0

    Posted October 24th, 2022 14:00

    Network card, sound card, adapter card, very vague to suggest a card that will fit.

    Same request as other member, a picture of your installation would help to see the issue better.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    561

    0

    Posted October 24th, 2022 19:00


    @renwd wrote:

    The service manual is no help with this issue. All cards I looked at will not fit. The slots on the mother board are recessed from the rear of the computer. Others have expressed the same issue. Suggest a card that will fit. The cards I have looked at ALL are about 2 1/2" from the rear pins to the bracket. They need to be 3 1/2" from the rear pins to the bracket to fit the 8950. 


    We have no idea what you are talking about, but we are willing to help you.

    So, you have no dedicated video card installed? And no other PCIe cards installed, so when you look at it you think no PCIe cards will fit?

    PCIe cards come in various slot-lengths ... x1, x4, x8, and x16.

    https://community.fs.com/blog/pcie-card-selection-guide.html

    Also, smaller cards will also fit-down-into and work in the longer slots.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • renwd

    1 Rookie

    •

    14 Posts

    543

    0

    Posted October 25th, 2022 19:00

    Yes I have a PCIe x 16 video card installed and it fits exactly as it is supposed to fit. The 8950 has two vacant PCIe x 4 slots which with a regular card the bracket is about 1 inch short of the rear of the computer. The PCIe x 4 slots on the mother board are set back too far for a card bracket to reach the rear of the computer case.

  • Traveller417

    1 Rookie

    •

    20 Posts

    311

    0

    Posted May 5th, 2023 03:00

    Here is a phot to indicate the distance I think you mean!

    zzzz.jpg

  • Traveller417

    1 Rookie

    •

    20 Posts

    311

    0

    Posted May 5th, 2023 03:00

    Please could you be more specific regarding the measurement of the required PCIe card. Are you referring to the distance between the bracket and the most distant pin of the most distant two sets of pins - ie the furthest of all pins from the bracket?

    Regards

  • user_4ff1de

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted November 24th, 2025 16:58

    I see this question was not resolved. I am too experience the same issue. I cannot say what card the original poster was attempting to use, but I was looking to install a different network adapter, specifically TP Link Network Card (TG-3468), to use in place of the ethernet on the motherboard. I did not think to question the size of the pci-e card as I have never experience one not fitting with the exception of an oversized GPU. The issue that I am experience is that due to the 3070 GTX installed, the motherboard appears to be recessed further back to accommodate the size of the GPU. As a result, the back plate of this standard size pci-e cards does not reach the back of the case and is about 1 inch recessed.

    This there something that I am missing or other components that I should be looking to use that fit this case/motherboard? Or an adapter to "extend" the ports to the rear panel?

  • user_4ff1de

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted November 24th, 2025 22:16

    (SOLVED)

    UPDATE: Since I cannot "solve" this issue since it is not my original post, I wanted to at least share my solution. 

    It was not initially apparent, but I did eventually realize that it was user error on my part. Since the network adapter I am installing is a PCI-E x1 and the available slot on the Dell motherboard is PCI-E x4, I did not realize I was inserting the card incorrectly. I overlooked the fact that it is a smaller size and had inserted the card connector along with the lock mechanism/tab adjacent to that connector into the port, therefore it was approx 1 inch off.

    After realizing this, I reseating the card and everything fit and works fine.