UNSOLVED

Scoutpuppy

updated

2 months ago

S

Scoutpuppy

1 Rookie

•

8 Posts

•

23 Points

0

451

September 2nd, 2026 08:52

XPS 8940, 2x16GB RAM (M378A2G43AB3-CWE) and 2x8GB RAM (M378A1G44AB0-CWE), does not boot

Hi,

 

I will start by saying I have tried multiple combinations of cards in different DIMM slot configurations. I have also read other posts on this topic and none of the suggested solutions have worked for me.

 

I can only get 2 RAM cards to work at the same time. I am unable to get 4 RAM cards to work.

The only two combinations that work are

2 *8GB in DIMM slot 1 and 2

2 *16GB in DIMM slot 1 and 2

 

The following combinations do not work

Fail - DIMM slot 1 & 3 with the 8GB cards and slot 2 & 4 with the 16GB cards

Fail - DIMM slot 1 & 3 with the 16GB cards and slot 2 & 4 with the 8GB cards

Fail - DIMM slot 1 & 2 with the 8GB cards and slot 3 & 4 with the 16GB cards

Fail - DIMM slot 1 & 2 with the 16GB cards and slot 3 & 4 with the 8GB cards

 

When trying each combination I have unplugged the power cord, press the power button for 15 seconds, removed the CMOS battery and pressed the power button for 30 seconds.

 

I have attached three pictures

  1. A picture showing both of the two Samsung RAM card types I am using. The model numbers are M378A2G43AB3-CWE AND M378A1G44AB0-CWE 
  2. A picture showing what the 2*16GB cards read as using CPU-Z
  3. A picture showing what my Motherboards reads as using CPU-Z

 

I bought the PC with 2*8GB cards and have just bought the 2*16GB cards as I wanted to get to 48GB RAM. 

 

 

Can anyone tell me what I need to do so I can use all four RAM cards?

(edited)

3 Attachments

  • Sharan G

    2 Intern

    •

    98 Posts

    •

    309 Points

    15

    0

    Posted September 2nd, 2026 09:40

    @Scoutpuppy 

     

    Thanks for adding the screenshots. The two Samsung modules are both DDR4-3200 UDIMMs, but they are not electrically identical: the 16 GB modules are 1Rx8, while the 8 GB modules are 1Rx16. The XPS 8940 supports four memory slots and 48 GB in principle, but this particular mixed 1Rx8/1Rx16 combination may fail BIOS memory training.

     

    Since each matched pair works by itself but no four-DIMM combination POSTs, the modules are probably individually good. I would recommend returning the 16 GB modules and using either four matching 8 GB modules for 32 GB or four matching 16 GB modules for 64 GB. Also ensure the memory runs at the system’s supported speed—up to 2666 MT/s with Core i3/i5 or 2933 MT/s with Core i7/i9—not necessarily its advertised 3200 MT/s.

     

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

     
     
     
    Is Pro Tip
  • Scoutpuppy

    1 Rookie

    •

    8 Posts

    •

    23 Points

    12

    0

    Posted September 2nd, 2026 10:01

    @Sharan G​ Thanks.

    I am aware of the Dell limitation that Speed Downclocks the 3200 MT/s RAM to 2933 MT/s in my i7 Motherboard/Processor. This Speed Downclocking is a different issue.

    Other than the Dell i7 limitation the RAM run at there advertised specifications.

     

    Prior to buying the two new 16GB RAM cards I chose to spend extra to get Samsung cards and have them with the same voltage etc.

     

    I was prepared for some efficiency loss from having R8 and R16 together, however nothing in any documentation says that this combination of memory would not work at all.

     

    I am hoping this is not another undocumented or secretly documentation limitation of Dell motherboards that only comes to light after someone complains about it not working.

    (edited)

  • DELL-ChrisM2

    Community Manager

    •

    1995 Posts

    •

    10006 Points

    0

    0

    Posted September 2nd, 2026 11:17

    We Dell Liaison have tried to be transparent about the fact that our released specifications for memory type and configurations are defined by the usage of our validated OEM memory in the 2020 released XPS 8940.

     

    48GB was never a tested/validated configuration. I have seen users using that non-supported configuration, but they had to purchase multiple 3rd party 16GB memory sticks to find a combination that worked.

     

    User uploaded image

     

    Tested/validated OEM 16GB memory sticks =

     

    DK8NX 16GB DDR4, 3200MHz, 2Gx64, Unbuffered, 288 pin, Single Rank, 1.2V, Non-ECC, Non-Encrypted

    Adata AO2P32NCSV1-BEVS

    Hynix HMAA2GU6AJR8N-XN/HMAA2GU6CJR8N-XN

    Kingston KDK8NX-MIB/KDK8NX-MIE

    Micron MTA8ATF2G64AZ-3G2B1/MTA8ATF2G64AZ-3G2E1

    Samsung M378A2G43AB3-CWE/M378A2G43BB3-CWE

     

    C5N22 16GB DDR4, 3200MHz, 2Gx64, 2RX8, Unbuffered, 288 pin, Dual Rank, 1.2V, Non-ECC, Non-Encrypted

    Adata AO2P32NCST2-BZ7SHD

    Hynix HMA82GU6DJR8N-XN

    Kingston KC5N22-HYD/KC5N22-MIE

    Micron MTA16ATF2G64AZ-3G2J1

    Samsung M378A2K43EB1-CWE

     

    Tested/validated OEM 8GB memory sticks = 

     

    9CXF2 8GB DDR4, 3200MHz, 1Gx64, Unbuffered, 288 pin, Single Rank, 1.2V, Non-ECC, Non-Encrypted

    Adata AO2P32NC8W1-BD3SHC

    Hynix HMAA1GU6CJR6N-XN

    Kingston K9CXF2-MIB/K9CXF2-MIE

    Micron MTA4ATF1G64AZ-3G2B1/MTA4ATF1G64AZ-3G2E1

    Samsung M378A1G44AB0-CWE/M378A1G44BB0-CWE


    V0M5R 8GB DDR4, 3200MHz, 1Gx64, 1RX8, Unbuffered, 288 pin, Single Rank, 1.2V, Non-ECC, Non-Encrypted

    Adata AO2P32NC8T1-BZ5SHD

    Hynix HMA81GU6CJR8N-XN/HMA81GU6DJR8N-XN

    Kingston KV0M5R-HYD/KV0M5R-MIE

    Micron MTA8ATF1G64AZ-3G2J1

    Samsung M378A1K43EB2-CWE

     

     

    (edited)

     

    #IWork4Dell

  • Scoutpuppy

    1 Rookie

    •

    8 Posts

    •

    23 Points

    10

    0

    Posted September 2nd, 2026 12:29

    @DELL-ChrisM2​ Thanks, I see you have copied and pasted a highly detailed technical table from another post that barely relates to the exact question I have.

     

    Please do not rely on me to interpret your copy and past response.

     

    My interpretation is that I have now encountered another undocumented limitation of the Dell 8940 PC where I can't upgrade the existing 16GB of RAM to 48GB of RAM with standard RAM Chips from the same manufacturer.

     

    or to put it anoter way, I have wasted money trying to obtain 48GB as I will not be able to get to 48GB.

     

    If you are wanting to be transparent, be specific and up front and do not copy and paste content that does not answer the question.

     

    If Dell is serious about being transparent it would have a warning that read soemthing like this.

     

    "Many users who have tried to upgrade Dell machines have found that Dell machines are intolerant and incompatable with standard hardward that users would be entitled to assume would work with the Dell Machine."

     

     

     

  • DELL-ChrisM2

    Community Manager

    •

    1995 Posts

    •

    10006 Points

    13

    0

    Posted September 2nd, 2026 12:52

    @Scoutpuppy​ 

     

    "I see you have copied and pasted a highly detailed technical table from another post that barely relates to the exact question I have."

     

    Not from another post. I copied that chart directly from the linked above and HERE online XPS 8940 Setup and Specifications PDF. It "relates" to you trying to run the non-supported 48 GB Configuration.

     

    "My interpretation is that I have now encountered another undocumented limitation"

     

    It is documented as shown in the chart.

    (edited)

     

    #IWork4Dell

  • Scoutpuppy

    1 Rookie

    •

    8 Posts

    •

    23 Points

    0

    0

    Posted September 3rd, 2026 01:21

    @DELL-ChrisM2​

     

    You did not answer my question.

    Does Dell know how I can get my 4 Samsung RAM chips to work? I think you are answering no and the answer of no is because Dell motherboards only support a micro fraction of RAM stick combinations.

     

    Is your answer that it is not possible to use official Samsung 16gb sticks with the official Dell supplied Samsung 8gb sticks and that no one should try and expand there memory by trying to use Samsung sticks.

     

    You do realise how many possible combinations of RAM sticks exist and that Dell is exlicitly saying 99% of all RAM stick comboinations either will not work or if they work then Dell will not support them.

     

    You have copied and pasted that same table and while this time you provided the link to the original place it came from in your most recent reply to me it does not change the fact you are copy and pasting a table that does not answer the question and DOES NOT HELP.  

     

    Here are two more examples where you postd that useless table that tell the user that Dell only supports 1% of RAM stick combinations.

     

    Your table DOES NOT SAY WHAT IT KNOWS DOES NOT WORK. DELL ONLY SAYS WHAT IS HAS DISCOVERED THAT DOES WORK. THIS IS USELESS

     

    https://www.dell.com/community/en/conversations/xps-desktops/xps-8940-ram-upgrade-4x8gb/64c10622f4ccf8a8ded4cea2

     

    https://www.dell.com/community/en/conversations/vostro-desktops/vostro-3710-dual-channel-memory-not-recognized/647fa365f4ccf8a8de942c6d

     

    IF DELL WAS TRANSPARENT

    Dell needs to warn every user that any attempt to expand RAM is not supported unless it is done with the extremely limiting specific list of sticks that Dell has tested.

     

    Dell should tell users that any attempt to use one of the 99% of RAM stick combinations is unlikelt y to work and Dell know that many combinations do not work.

     

    If Dell knows of a combination does not work then it must add it the table to warn users against wasting money on trying to expand there Dell Machine and use the empty DIMM slots.

     

     

     

    I repeat if you were honest in your statement about Dell being transparent then you would not just post an irrelevant table you would answer the question directly and warn everyone that Dell motherboards are very intolerant of standard RAM sticks.

     

    Is your answer that Dell provide no support for a user when they try to expand there memory.

     

     

     

    WARNING FROM DELL: Dell does not have any support of tyhe 99% of RAM stick combinations and Dell is aware of may combinations that do not work but Dell will not tell you which do not work.

  • anne_droid

    6 Operator

    •

    2641 Posts

    •

    9711 Points

    10

    0

    Posted September 3rd, 2026 08:07

    Hi

     

    You can’t get exactly 48 GB in a Dell XPS 8940 using standard, supported DIMM sizes. The system supports 4, 8, 16 and 32 GB modules per slot, and Dell’s documented configurations jump from 32 GB to 64 GB, with no 48 GB option.dell+3

     

    Why 48 GB isn’t a supported config

    • The XPS 8940 has four DDR4 UDIMM slots, max 128 GB total.dell+1

    • Dell lists supported module sizes as 4 / 8 / 16 / 32 GB per slot.dell+2

    • Official configs include:

      • 32 GB = 2×16 or 1×32

      • 64 GB = 4×16 or 2×32

      • 128 GB = 4×32
        but no 48 GB configuration.dell+1

    To get 48 GB with four slots and those module sizes, you’d need a mix like 16+16+8+8 = 48 GB, which is mathematically possible but not listed as a supported configuration by Dell, and may cause stability or compatibility issues (especially with mixed capacities and ranks).dell+1

     

     

    https://www.dell.com/support/product-details/en-us/product/xps-8940-desktop/resources/manuals

     

     

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

    Is Good Troubleshooting
  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    10

    0

    Posted September 4th, 2026 01:31

    The only memory modules guaranteed to work are the ones listed by Dell as they have been validated.

    Any other memory modules have not been validated and therefore might or might not work.

     

    While it is true that retail boards often have extensive QVL lists that contain many memory modules/brands as being tested and verified to be compatible, Dell is an OEM and has decided to only test the OEM memory modules (that they sell).

     

    I ran into this with my R10 some years ago and had to do some internet searching to find aftermarket memory modules that worked.

     

    As for the 48 GB combination: this is not a supported combination according to the official documentation posted above.

    Also, mixing different sizes can lead to performance loss as 1 bank will have 2 x 16 and the other bank  2 x 8.

    If you look at the posted table you will see it's either single, dual or quad sticks of equal size.

    Is Good Troubleshooting
  • Charlie84

    1 Rookie

    •

    32 Posts

    •

    52 Points

    6

    0

    Posted September 5th, 2026 01:12

    How are you numbering the RAM slots?  DIMM slots are numbered starting from slot closest to the CPU: 3-1-4-2.  

     

    This may sound totally weird/strange/wrong, but have you tried mixing the modules in each bank like this?

     

    DIMM 1: 8 GB 

    DIMM 3: 16 GB, 

    DIMM 2: 8 GB

    DIMM 4: 16 GB

     

    If that doesn't work, try: 

    DIMM 1 16 GB

    DIMM 3: 8 GB

    DIMM 2: 16 GB

    DIMM 4: 8 GB

     

    Be sure to reset BIOS each time you make a change by removing motherboard battery and pressing/holding power button (PC unplugged) for ~30 sec, before reinstalling the battery. 

  • Scoutpuppy

    1 Rookie

    •

    8 Posts

    •

    23 Points

    14

    0

    Posted September 5th, 2026 04:09

    @Charlie84​ 

     

    This is how I describe it in my first post. I tried all combinations and removed the battery in between each attempt.

    The following combinations do not work

    Fail - DIMM slot 1 & 3 with the 8GB cards and slot 2 & 4 with the 16GB cards

    Fail - DIMM slot 1 & 3 with the 16GB cards and slot 2 & 4 with the 8GB cards

    Fail - DIMM slot 1 & 2 with the 8GB cards and slot 3 & 4 with the 16GB cards

    Fail - DIMM slot 1 & 2 with the 16GB cards and slot 3 & 4 with the 8GB cards

     

    When trying each combination I have unplugged the power cord, press the power button for 15 seconds, removed the CMOS battery and pressed the power button for 30 seconds.