UNSOLVED

rje49

updated

7 years ago

R

rje49

1 Rookie

•

141 Posts

0

1676

June 25th, 2019 11:00

XPS 8930, how to switch from PCIe to sata SSD boot?

I have a XPS-8930 with a M.2 PCIe SSD. I want to switch to a SATA SSD. I have a new Samsung 1TB SSD and have cloned my boot drive (PCIe SSD) onto the SATA SSD. 

I removed the PCIe and tried to set the boot drive to the SATA drive. My first problem is not being very familiar with the new UEFI BIOS and how to change the boot order, etc.  I get a "Your PC needs to be repaired. A required device isn't connected or is missing".  Reconnecting the PCIe SSD gets me the same message, as long as the SATA SSD with the operating system on it is still connected. When entering BIOS, the Main page shows my SATA SSD as 1st boot, but on the Boot page, I can't figure out what to do with Windows Boot Manager. 

I've never had a problem changing HDs or boot orders for the past nearly 15 years, but between never dealing with a PCIe boot or the UEFI, I'm lost. Obviously missing a couple of things here...

Just looking for a step by step to finish making the switch to SATA boot. 

Thank you.  

  • Vic384

    6 Operator

    •

    3161 Posts

    1429

    0

    Posted June 25th, 2019 15:00

    Removing the M.2 SSD and connecting the Samsung SSD is all that you should need to do. The UEFI BIOS should have detected the new boot drive. There is no need to or ability to change the boot order. If you have more than one boot device then you need to boot using F12 and select the boot device from the Boot Menu that appears. I suspect something wrong with the cloning. How did you clone your M.2, did you use Samsung Data Migration software?

  • rje49

    1 Rookie

    •

    141 Posts

    1411

    0

    Posted June 26th, 2019 05:00

    I used Apricorn - a disc and cable kit. I've used it several times before when replacing hard drives with SSDs. It's always worked perfectly.  

    I'm going to "Plan B" - I just ordered a larger capacity PCIe SSD. After updating my system image on an external HD, I'll swap it out and use the Recovery mode.

     

  • speedstep

    11 Legend

    •

    46969 Posts

    1385

    0

    Posted June 27th, 2019 05:00

    PCI-E is not AHCI sata.

    Your PC needs to be repaired. A required device isn't connected or is missing"

    STOP 7B  INACCESSABLE BOOT DEVICE.

    You cannot clone VHS to Beta either.

    You can set the SATA Operation to AHCI and set secure boot OFF and then F12 boot WINDOWS 10 media and format and install clean using WINDOWS 10 DVD and USB 2.0 optical drive.  CANNOT BE USB3 MODEL MUST BE USB 2 MODEL.  That setup works fine with all dells from 2006 to 2019.

    https://www.newegg.com/microsoft-windows-10-home-64-bit-installation-recovery-disc-only-no-license-key-included/

     

    https://www.bestbuy.com/site/lg-8x-external-usb-2-0-blu-ray-disc-double-layer-dvdrw-cd-rw-disc-rewriter-black/9243009.p?skuId=9243009

     

    DOH!DOH!

     

    DOH!DOH!