UNSOLVED

NEIsTEVE

updated

3 days ago

N

NEIsTEVE

1 Rookie

•

3 Posts

•

9 Points

0

78

November 9th, 2026 20:39

UEFI Network Stack not disabling through WMS

I'm going through the upgrade process to latest ThinOS, I'm staging the process first to change the bios password, then to not change but keep the bios password. Now to disable UEFI network stack. I set the policy in WMS to disable, it saves as disabled, but when I check in the bios its still checked as enabled. I can only disable it manually on the device directly. Is this a setting that cant be set to disabled from WMS? 

  • DELL-Scott H

    Moderator

    •

    1076 Posts

    •

    5050 Points

    3

    0

    Posted November 13th, 2026 01:39

    Did you confirm that you have already pushed the security package?

    https://www.dell.com/support/product-details/en-us/product/optiplex-3000-thin-client/drivers?driverid=GJHYM&driveros=thn10&ld=GJHYM

     

    This adds the digital certificate needed to push later firmware builds. 

    The BIOS changes need to be made in the SAME group as the firmware build (2605 or 2609) as the firmware process needs to make the bios changes.  

     

    Cant wait until this is no longer needed :) 

     


    DELL-Scott H
    #IWork4Dell

  • Cleem05

    2 Posts

    •

    8 Points

    3

    0

    Posted November 18th, 2026 09:15

    @DELL-Scott H​ 

     

    Hi!

    I have the same issue. In my case, I can confirm that I pushed the security firmware.

     

    I made the changes in the same group, but it's not working. Actually, my Thin Clients are on 2602_10_0765, which is the firmware pushed by my WMS console.

    I want to push 2605.10.2100, but I need to change the UEFI Network Stack first.

     

    Thanks in advance :)

     

  • DELL-Scott H

    Moderator

    •

    1076 Posts

    •

    5050 Points

    2

    0

    Posted November 18th, 2026 15:04

    @Cleem05​ 

    1. Make sure you are on the latest BIOS package available.
    2. I would shift from testing 2605 to 2609.   

     


    DELL-Scott H
    #IWork4Dell

  • Cleem05

    2 Posts

    •

    8 Points

    3

    0

    Posted November 18th, 2026 15:19

    @DELL-Scott H 

     

    Thanks, 

     

    I'm already in 1.35.0 bios version.  

    I can't go from 2602.10.0765 to 2609.XX, WMS won't let me "ThinOS_10_2605_10.2100 or higher build is the required prerequisite build for applying this ThinOS 10 2609 upgrade package" 

     

    In any case, following this conversation : ‎ThinOS 10 2605 released | DELL Technologies I need to disable the "Enable UEFI Network Stack" in bios settings, right ? 

  • DELL-Scott H

    Moderator

    •

    1076 Posts

    •

    5050 Points

    3

    0

    Posted November 18th, 2026 15:57

    @Cleem05​ 

    Make sure you are using the right upgrade package

    https://www.dell.com/support/product-details/en-us/product/wyse-thinos-maintenance/drivers?driverid=46G1W&driveros=thn10&ld=46G1W

     

    This package contains the ThinOS 10 2609 upgrade and downgrade package. This package is intended for customers who want to upgrade from ThinOS 10 2511 10.0320, 10.0327, 10.0380 and 2602 10.555, 10.573,10.580 , 10.765 and 2605 10.2100, 10.2518, 10.2525, 10.2616 and downgrade to ThinOS 10 2609 from later versions.

     

    Prerequisites
    - Create a group in Wyse Management Suite with a group token.
    - The thin client must be registered to Wyse Management Suite.
    - Download the Root_2609.10.3xxx_T10.pkg firmware to upgrade\downgrade.

    Note:
    Follow the sequence below before performing any firmware updates:
    1. Update ConfigUI to version 1.10.847.
    2. In BIOS Common Configuration, set the BIOS policy option ""Enable UEFI Network Stack"" to Disabled before deploying the Security Add-on to the client.
    3. Deploy the Security Add-on package as a standalone package.
    4. After the Security Add-on deployment is complete, deploy the Firmware Upgrade package.


    DELL-Scott H
    #IWork4Dell