A problem has been detected and windows has been sutdown to prevent further damage to your computer
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue, disable or remove and newly installed hardware or software. Disable BIOS memory option such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Sage Mode
Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance.
I called the tech support line yesterday and was told to disable some startup programs to see if it would help but it did not. I have run the diagnostics CD numerous times and have not received any error whatsoever. I have also updated every driver I can think of but to no avail. This leads me to believe that it is not a hardware issue but a software issue. I would like to do a clean install of Windows XP that will wipe my C drive so that I may start from scratch. Does anyone have some helpful suggestions on how I can safely do this?
PC Specs:
Dimension 8300
Intel(R) Pentium(R) 4 CPU 3.00GHz,
1024 MB Memory (2x 512 MB)
Lite-On LTN486S 48x Max
TEAC DVD+RW DV-W58E
Microsoft Windows XP Professional, 01-22-2004, 5.1.2600, Service Pack 1
If your system was running properly and you have not installed any new hardware it is highly unlikely that you would have an IRQ conflict. The IRQs were properly set originally and only new hardware would cause a conflict. The link to the SuperSite for XP will give you good instructions for the reinstallation. Some additional information is available
here.
I forgot to thank you earlier for the link. My apologies
Denny,
Upon looking further in my System Information (msinfo32) I noticed about 18 items listed in Conflicts/Sharing. Should I be concerned to the extent that this is indeed a hardware matter that will not be resolved by a clean installation?
What I am really hoping for is that this is only an OS/software issue and not hardware. I would like to start from scratch for several reasons but I do not want to waste my time.
According to one source, the error you are receiving is due to "The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile." Since you have no new driver and your diagnostics indicated no memory problems, you can rule out a damaged pagefile by performing the procedure given
here. (I don't know why Microsoft lists it as applicable to only XP Home and not both.)
If that does not clear up the problem it would appear that a clean reinstall is probably not a waste of time.
jmwills
2 Intern
•
11984 Posts
692
0
Posted May 27th, 2004 23:00
Try here:
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp