UNSOLVED

Jon Magnusson

updated

10 years ago

0

3907

July 15th, 2016 03:00

DELL E6410 SHUTDOWN

I recently upgraded my Dell E6410 to windows 10, even though the model is not tested by DELL.  All worked perfectly apart from one problem that is after couple of hours the system shuts automatically down.  It looks related to the CPU fan started.  Anyone has a solution to this issue?

  • Mary G

    6 Operator

    •

    20095 Posts

    2717

    0

    Posted July 19th, 2016 10:00

    Try the Microsoft Forum for help with this. There have been answers posted there about this.

    answers.microsoft.com/.../windows_10

  • 2717

    0

    Posted August 1st, 2016 10:00

    I did try the Micrsoft Form trix's but none of them seems to work.  It looks like the E6410 is not suited for Windows 10.  

    My findings is are these:

    - Un expected shutdonw - it look like heating since the fan starts just before.

    - Unexpected frost - once every couple of days

    - Touchpad stops working for a moment but works again after using the pointstick

    The shutdown is the worst issue

  • Philip_Yip

    11 Legend

    •

    16052 Posts

    •

    65915 Points

    2716

    0

    Posted August 1st, 2016 14:00

    Run [F12] preboot diagnostics, let us know if you get any error messages:

    http://dellwindowsreinstallationguide.com/f12-preboot-diagnostics/

    Then can you install Piriform Speccy and use it to monitor your temperatures... Note some of your issues may be due to an Upgrade Install opposed to A Clean Install.

  • 2716

    0

    Posted August 1st, 2016 18:00

    Did all of this but did not help. The diagnostics tool gave all in top shape.  So there must a problem with the OS and the computer.

  • 2716

    0

    Posted September 13th, 2016 02:00

    Did all of thouse and restalled but no luck.  Looks like E6410 simply dose not work for windows 10.

  • 2377

    0

    Posted November 8th, 2018 12:00

    I had this problem on a Dell E6410 with Ibex Peak platform ( Core i5 560m ) that uses the ME 6.0. No drivers worked on Windows 10 x64. The laptop wouldn't shut down or sleep or hibernate under Windows 10.

    I finally solved it after many tries : You have to use MBR partition table. The problem is that when you make a clean install of Windows 10, it defaults to a GPT partion table when booting the installation media in UEFI mode.

    So the solution is quite easy : disable UEFI booting, boot the usb key and install ( you may have to "clean" your disk for this to work, procedure is here https://docs.microsoft.com/en-us/windows-server/storage/disk-management/change-a-gpt-disk-into-an-mbr-disk )

    Be aware that all data on the disk will be destroyed this way.

    However you can do it without destroying data using Easus Partition Master ( https://www.easeus.com/partition-master/convert-gpt-disk-to-mbr-disk.html ) Personally I had no other computer so I had to create a bootable Partition master to convert the disk (hence buying the software ) but it works !