UNSOLVED

cassius37

updated

13 years ago

C

cassius37

12 Posts

0

626

September 11th, 2013 14:00

Riverbed Steelhead and VNX

I have a question regarding Riverbed Steelhead and VNX.  We have a 350Mbps connection from our building to the DC where our VNX is housed.  We are in the process of migrating from a NetApp housed in our building to the VNX at the DC.  There is expected latency since this data will no longer be housed onsite in the building.  We have Riverbed Steelhead in place on our network.  Is there a config setting on the appliance that would enhance network performance in regards to or is the 350Mbps a limitation that cannot be overcome?

  • christopher_ime

    6 Operator

    •

    1962 Posts

    305

    0

    Posted September 13th, 2013 23:00

    Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility.  Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.

    You can do so by selecting "Move" under ACTIONS along the upper-right.  Then search and select: "VNX Support Forum".