Will it cause any performance impact or any other issues if there are no DAEs on BUS 0 on a VNX5600? All the DAEs - 17 total - are balanced across BUSES 1,2,3,4,5. I know it would be best to load balance them across all the available buses, but it is already cabled and initialized omitting bus 0. So bus 0 can be used for the future expansion. Maybe it is worth re-cabling the array and utilizing all the buses?
It will cause in imbalance. Depends on how hard you push the array and the other available buses. Also, if you dont have 0_0 cables, im not sure if it will work. I believe vault has to be in and cables to 0_0
Does it have any lag? - Unknown, there is no production data on it yet.
As per EMC that config would not be correct confid Ad-astra. - This is funny, because EMC field services engineers cabled it this way, omitting bus 0. I guess, if it goes against EMC best practices, they should have brought this up, not me, after it is cabled and initialized.
Will it work? Yes practicality it should - It does work, at least it is up and running, no prod data on it yet.
Will that create a problem? High chances of yes - Why will it create a problem? Could you elaborate on this.
And if there is a performance issue then the first recommendation would be to re-configure. - I agree, but it will depend on the nature of the problem.
Maybe it is worth re-cabling the array and utilizing all the buses?>> Oh yes - I agree, just wanted to find out what complications may come out of it.
cypherstrength
12 Posts
842
0
Posted March 12th, 2015 07:00
My opinion is that you should recable it with alternating buses. For example, the first few DAE's would be 0_0, 1_0, 2_0, 3_0, etc....
This allows for all buses to be used early on in the expansion.
Mike