UNSOLVED

abesundstrom

updated

13 years ago

1

992

March 11th, 2014 05:00

Migrate VDM and FileSystem on VNX5300 for Upgrade of OE's and VP RAID Restructure

I will be updating the current VNX5300 from:

     FLARE     05.31.000.5.716

     DART       7.0.52-1

To:

     FLARE     05.32.000.5.209

     DART       7.1.74.5

Our infrastructure includes two VNX 5300 storage array's and RPA's within the same site.  One utilized as the Primary and the other used as the secondary for Failover.

We currently have a VDM that is configured for CIFS residing on a FAST VP.  This VDM is not currently replicated to the secondary array. During the upgrade process I plan on restructuring the RAID groups to EMC Best Performance Practices and will need to destroy and recreate the VP.  I have more disks coming in for the project and will have them available during the upgrade to move the VDM and File System to, as an option.

I would like to hear from the community thoughts on the best approach for the Upgrade\RAID Restructure\Migration and paths that would accomplish it with the least amount of downtime.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    485

    0

    Posted March 11th, 2014 06:00

    what exactly are you doing ? Are you using traditional raid groups today or a dedicated pool for file storage ?

  • 485

    0

    Posted March 11th, 2014 08:00

    Today we are using a FAST Pool which has both Block Storage and the File Storage presented from it.  I would like to destroy the FAST pool and and recreate it with the RAID groups aligned to the Performance Best Practices.

    I will also be creating a second Traditional RG or FAST Pool to house our RPA Journal LUNs.  Which could serve as a temp location for the migration of the CIFS.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    485

    0

    Posted March 11th, 2014 10:00

    so you will need to shuffle your LUNs around to rebuild the pool. Block LUNs can be easily migrated to another pool/raid group using LUN Migrator but for File LUNs there are certain restrictions when it comes to using LUN Migration ( i can't seem to find the knowledge base article that describes them)

  • 485

    0

    Posted March 11th, 2014 10:00

    The LUNs will not be the problem, I’ll be able to present LUNs from the secondary to the VMware Hosts to migrate the VMs to. Keeping the CIFS VDM and File System intact is the part that I’m trying to work through. I don’t know if with that version of Flare\DART, how I can migrate both the VDM and File System to another array or RG\VP. So any direction in that portion would be very helpful.

    Thanks,

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    485

    1

    Posted March 11th, 2014 12:00

    option 1 i would investigate if you can use LUN Migration for file system being used by VDM and file system that contains the actual customer data. If that's supported that would give you the easiest/non-disruptive path to migrate to another pool/RG. If that option is not available you can always use VNX Replicator, basically you perform loopback replication within the same array. Say you create new pool/RG, present that storage to VNX File, create new file system and then setup replication session for both VDM and the file system. You will need to schedule downtime to "cut-over" to the new file system. Download VNX simulator so you can practice this process. If you were only migrating the data file system you could use server_archive command but i don't think you can use it for file systems that house VDMs.