UNSOLVED

cameronredux

updated

11 years ago

C

cameronredux

2 Intern

•

615 Posts

0

63002

September 30th, 2015 15:00

What is the racadm command to check psu redundacy iDRAC7 ?

Today I noticed one of my R620s had a Redundancy Policy in Power Supply Options of "Not Redundant"

I have separate circuits going to each PSU so it seems I would want that to be "Input Power Redundant".

In the racadm CLI guide I don't see any command to check the value of that setting and I have a few hundred servers I would like to verify that setting.

Any ideas?



  • mondeep

    30 Posts

    6719

    1

    Posted October 1st, 2015 05:00

    Hi Cameron,

    You can check this attribute:

    racadm help system.power.RedundancyPolicy

    To set it to Input Power Redundant you need to run this command:

    racadm set system.power.RedundancyPolicy 1

    To view it after setting Redundancy policy to Input Power Redundant:

    racadm get system.power.RedundancyPolicy

    Regards,

    Dell-Mondeep

  • cameronredux

    2 Intern

    •

    615 Posts

    6719

    0

    Posted October 1st, 2015 11:00

    Excellent. Thank you Mondeep!

  • simonpei

    4 Posts

    2949

    0

    Posted August 19th, 2021 19:00

    Wondering how to check status of power supply slot status

    racadm>>swinventory

    -------------------------SOFTWARE INVENTORY------------------------

    ComponentType = FIRMWARE
    ElementName = Power Supply.Slot.1
    FQDD = PSU.Slot.1
    InstallationDate = 2021-03-19T17:44:24Z
    Current Version = 04.10.26
    HashValue = NA
    -------------------------------------------------------------------

    ComponentType = FIRMWARE
    ElementName = Power Supply.Slot.2
    FQDD = PSU.Slot.2
    InstallationDate = 2021-03-19T17:44:24Z
    Current Version = 04.10.26
    HashValue = NA
    -------------------------------------------------------------------

     

    racadm>>get PSU.Slot.1
    ERROR: SWC0244 : Invalid Fully Qualified Device Descriptor (FQDD).
    racadm>>

     

     

    racadm>>get system.power.RedundancyPolicy
    A/B Grid Redundant
    RAC1248: The RACADM "System.Power" group will be deprecated in a future release of iDRAC firmware.
    The group attributes will be migrated to "System.ServerPwr".
    racadm>>get System.ServerPwr
    #ActivePolicyName=
    #ActivePowerCapVal=242
    #PowerCapMaxThres=680
    #PowerCapMinThres=468
    PowerCapSetting=Disabled
    PowerCapValue=242
    PSPFCEnabled=Disabled
    PSRapidOn=Enabled
    PSRedPolicy=A/B Grid Redundant
    RapidOnPrimaryPSU=PSU1
    racadm>>

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    2946

    0

    Posted August 19th, 2021 20:00

    You can run below command to get various sensor status including power supply slot

    racadm getsensorinfo