trying to upgrade LCC from installed version of 1.5.0.671 to current version. Tried to use USC to do this, it says drivers from ftp.dell.com are not valid / signed. i saw in another post that this gets fixed after you upgrade the LCC. Then tried downloading the LCC driver from dell website, but they are not usable under windows 2012 apparently as they won't run. i now have SUU 7.4 downloading, but as i have to wait 5 hours for that to complete (yeah really, and it's not on my end / i have an 80MB pipe). is there anything else i can do to get this done before SUU finishes? i tried the downrev version already as well, it didn't work either.. frustrating
The LCC is an operating system that runs from within the iDRAC. If you are having issues updating it then the first place I would start is the iDRAC. Update the iDRAC to the latest revision and try updating the LCC again.
We should have a version of the update that will run under 2012. You can also use the iDRAC web interface to perform the update. Download the repair package version of the LCC update, it is a .usc file. Connect to the iDRAC's embedded web server and go to the update and rollback section. Direct it to the .usc file on your computer and it will upload it from your computer to the iDRAC and perform the update.
Daniel, The challenge is that I'm STILL waiting for the iso to download and the USC is now hung up as well trying to update in parallel. if i can get it reset, i will give that a try next. as an aside, I don't know where you host the iso's for SUU, but you should move them outside to Amazon, Google, or anywhere else that knows how to host with a connection faster than a 28k modem.
ok, update.. after fighting this all night, I was able to use the idrac web interface to update the idrac itself up to 1.97, which is progress. as I'm still waiting for the SUU to download I figured I would try the USC again post idrac update. it's been grinding for about 45m now, so doubting it's working. hanging it up for tonight, will pick up again tomorrow
We have servers hosted throughout the world. When you are performing the download make sure you set your country on the page. It should direct you to a download server based on your country selection. You can usually tell which region you are downloading from by the URL. It will usually have a region identifier in it like US, UK, EMEA, APJ, etc. Some regions have slower download speeds than others.
If the update is stalled then try cancelling it from the iDRAC web interface. Then restart the iDRAC and try it again.
ok, cancelled the USC session and rebooted. installed LCC 1.6.5.12 per web interface, and that worked. now how do you recommend I do the BIOS? just tried inside OS, and that doesn't work. I don't see a web bios driver that I can install from web interface either? FYI - I'm fairly sure the download I did were from US, and they died repeatedly during download. I'll grant you these are huge files, but there has to be a better way.
You can use the non-packaged version. Create a bootable USB or any DOS bootable media and copy the file to it. Once you get to a command line run the executable and it will perform the update.
Daniel My
12 Elder
•
6205 Posts
903
0
Posted August 10th, 2014 17:00
Hello
The LCC is an operating system that runs from within the iDRAC. If you are having issues updating it then the first place I would start is the iDRAC. Update the iDRAC to the latest revision and try updating the LCC again.
We should have a version of the update that will run under 2012. You can also use the iDRAC web interface to perform the update. Download the repair package version of the LCC update, it is a .usc file. Connect to the iDRAC's embedded web server and go to the update and rollback section. Direct it to the .usc file on your computer and it will upload it from your computer to the iDRAC and perform the update.
Thanks