UNSOLVED

fester2468

updated

7 years ago

F

fester2468

1 Rookie

•

6 Posts

0

9011

August 30th, 2019 09:00

How to use racadm to get raid rebuild percentage?

Is there a way to use racadm commands to get the rebuild percentage of an array while it is rebuilding so we can monitor via a CLI tool.

I have looked at these command but they don't seen to offer what I am looking for.

racadm storage help rebuild
racadm help raid
racadm storage get controllers

  • Daniel My

    12 Elder

    •

    6204 Posts

    7355

    0

    Posted August 30th, 2019 14:00

    Hello

    I'm not aware of a method to get that information via RACADM. You can get it using omreport, and OpenManage CLI command. There is a CLI guid on the OpenManage Server Administrator support page. The command would be something like this:

    omreport storage pdisk controller=0

    http://www.dell.com/openmanagemanuals/

    That command will show the status of each disk. If a disk is rebuilding it will show a status of rebuilding and there is a progress line that will display a percentage.

    Thanks

  • nadogmoney

    2 Intern

    •

    185 Posts

    •

    2 Points

    7247

    1

    Posted September 10th, 2019 13:00

    You can use perccli if you have gone agentless and don't have OMSA installed

    https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=1xc7y

    Example:

    C:\> perccli.exe /call/eall/sall show rebuild

    Controller = 0
    Status = Success
    Description = Show Drive Rebuild Status Succeeded.


    ---------------------------------------------------------
    Drive-ID Progress% Status Estimated Time Left
    ---------------------------------------------------------
    /c0/e32/s0 - Not in progress -
    /c0/e32/s1 - Not in progress -
    ---------------------------------------------------------