My understanding (from our CE) is that each Disk Group can contain one drive type. You can have multiple disk groups of the same drive type, but can't mix drive types (interface, capacity, or speed) in a single group.
mixing FC and SATA drives in the same group ? I would think that would be a no no. Are you sure they are in the same disk group ? I would not think that bin file would have gotten approved.
Just curious because I am recently having a problem with SMC where it seems to keep forgetting that we have 20 disk groups and just shows me one (with all the drives in it). SymCLI shows it correctly (as does ControlCenter)
As a thumb rule 'having mixed drive types in one disk group is a strict no no' as mentioned on the earlier threads, because if mixed drives are kept in one group then the speed and the performance will be compromised.
You might have seen this in Disk Group "0" which contains ALL the SPARE disks. Mixing different drive types in one disk group (aside from disk group 0) is not recommended due to performance implications.
Thanks Andrew, I was actually thinking about this on the weekend, but you beat me to it getting the information "on paper". Hot Spares are indeed an exception to the rule.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
341
0
Posted April 19th, 2010 16:00
What did you have in mind ? Speed, capacity ?